Siemens MC55 Atsnfs Select audio hardware set, Atsnfs=?, Atsnfs?, Snfs audMode, ATSNFS=audMode

MC55 AT Command Set

16.15 AT^SNFS

s

mobile

16.15AT^SNFS Select audio hardware set

Syntax

Test Command

AT^SNFS=?

Response(s)

^SNFS: (list of supported <audMode>s)

OK

Read Command

AT^SNFS?

Response(s)

^SNFS: <audMode>

OK

Write Command

AT^SNFS=<audMode>

Response(s)

OK

ERROR

CME ERROR: <err>

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

SIEMENS

Command Description

The write command serves to set the audio mode required for the connected equipment. For use after restart of the module, you are advised to store the selected mode to the audio profile set with AT^SNFW. Otherwise, audio mode 1 will be active each time the module is powered up.

AT^SNFS can also be used in conjunction with AT^SAIC. This is useful, for example, if both interfaces are oper- ated alternatively to benefit from different devices. Each audio mode can be assigned a specific interface. To do so, first select the audio mode with AT^SNFS, then activate the audio interface with AT^SAIC and finally enter AT^SNFW to store the settings to your audio profile. To switch back and forth it is sufficient to use AT^SNFS.

MC55_ATC_V01.05	Page 413 of 469	2/10/04
Confidential / Released