MC55 AT Command Set

15.2 AT+CPBR

s

mobile

15.2AT+CPBR Read from Phonebook

This command serves to read one or more entries from the phonebook selected with AT command AT+CPBS. It can be used only after the phonebook's data has been read from the SIM successfully. Reading starts after successful SIM authentication has been performed and may take up to 30 seconds depending on the SIM used. While this read process is in progress, an attempt to use any of the phonebook commands will result in "+CME Error: SIM busy".

Syntax

Test Command

AT+CPBR=?

Response(s)

+CPBR: (1-<maxloc>),<nlength>, <tlength>

OK

+CME ERROR

Write Command

AT+CPBR=<location1>[, <location2>]

Response(s)

[+CPBR: <location1>, <number>, <type>, <text> ]

[+CPBR: <location2>, <number>, <type>, <text> ]

OK

+CME ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

GSM 07.07, GSM 11.11

Command Description

The test command returns the location range supported by the current phonebook storage, the maximum length of <number> field and the maximum length of <text> field. Note: Length information may not be available while SIM storage is selected. If storage does not offer format information, the format list contains empty parenthe- sizes.

The write command determines the phonebook entry to be displayed with <location1> or a location range from <location1> to <location2>. Hence, if no <location2> is given only the entry at <location1> will be displayed.

If no entries are found at the selected location "OK" will be returned.

MC55_ATC_V01.05

Page 371 of 469

2/10/04

Confidential / Released

 

 

Page 371
Image 371
Siemens MC55 15.2 AT+CPBR Read from Phonebook, At+Cpbr=?, +CPBR 1-maxloc,nlength, tlength, AT+CPBR=location1, location2