MC55 AT Command Set
19.7 Alphabetical List of AT Commands s
m
obil
e
MC55_ATC_V01.05 Page 468 of 469 2/10/04
Confidential / Released
AT^SSTGI SAT Get Information Chapter 14.3, page 366
AT^SSTR SAT Response Chapter 14.4, page 368
AT^SSYNC Configure SYNC Pin Chapter 17.6, page 437
AT^STCD Display Total Call Duration Chapter 7.29, page 185
ATA Answer a call Chapter 7.2, page 139
ATA Manual response to a network request for PDP context
activation
Chapter 10.14, page 271
ATD Mobile originated call to dial a number Chapter 7.3, page 140
ATD*98# Request GPRS IP service Chapter 10.16, page 274
ATD*99# Request GPRS service Chapter 10.15, page 272
ATD><mem><n> Originate call to phone number in memory Chapter 7.4, page 143
ATD><n> Originate call to phone number selected from active mem-
ory
Chapter 7.5, page 145
ATD><str> Originate call to phone number in memory with corre-
sponding field
Chapter 7.6, page 147
ATDI Mobile originated call to dialable ISDN number <n> Chapter 7.7, page 149
ATDL Redial last telephone number used Chapter 7.8, page 150
ATE Enable command echo Chapter 4.5, page 93
ATH Disconnect existing connection Chapter 7.9, page 151
ATH Manual rejection of a network request for PDP context
activation
Chapter 10.17, page 275
ATI Display product identification information Chapter 6.1, page 127
ATL Set monitor speaker loudness Chapter 16.2, page 393
ATM Set monitor speaker mode Chapter 16.3, page 394
ATO Switch from command mode to data mode / PPP online
mode
Chapter 7.17, page 160
ATP Select pulse dialing Chapter 7.16, page 159
ATQ Set result code presentation mode Chapter 2.4, page 34
ATS0 Set number of rings before automatically answering the
call
Chapter 7.11, page 153
ATS0 Automatic response to a network request for PDP context
activation
Chapter 10.18, page 276
ATS10 Set disconnect delay after indicating the absence of data
carrier
Chapter 7.15, page 158
ATS18 Extended call release report Chapter 3.5, page 85
ATS3 Write command line termination character Chapter 18.2, page 440
ATS4 Set response formatting character Chapter 18.3, page 441
ATS5 Write command line editing character Chapter 18.4, page 442
ATS6 Set pause before blind dialing Chapter 7.12, page 155
AT Command Description Chapter and Page