Mobile

MC55 AT Command Set

16.11 AT^SNFI

Notes

•Write command works only in audio modes 2 to 6!

•Read and write options of this command refer to the active audio mode.

•The range of <inCalibrate> is up to 65535 but will be suppressed to 32767. Values above <inCali- brate>= 65535 will cause a failure.

•Changed values have to be stored with AT^SNFW.

•Attention! When you adjust audio parameters avoid exceeding the maximum allowed level. Bear in mind that exposure to excessive levels of noise can cause physical damage to users!

•The default values are customer specific.

MC55_ATC_V01.05	Page 407 of 469	2/10/04
Confidential / Released

Page 407

Image 407

Contents

MC55 MC55 AT Command Set Contents AT+CMER AT+CSCSAtscfg ATSM20 AT+CPWD AtspicAT+CLCK Atslck Atscni AT+CRAT+CRC AT+CSNS AT+CGDATA AT+CGACTAT+CGANS AT+CGAUTO AT+FRM AT+FOPTAT+FREV AT+FRH AT+CPBR AtsstaAtsstgi Atsstr ATS4 AtsctmAtssync ATS3 List of Tables List of Figures Scope of the document Introduction Related documents PIN Document conventionsQuick reference table Superscript notation for parameters and values AT+CXXX? AT command syntaxUsing parameters AT+CXXX=? Combining AT commands on the same command line IRA Supported character sets Null AsciiBSP GSM alphabet tables and UCS2 character values Mobile UCS2 2 UCS2 and GSM data coding and conversion for SMS text modeCscs GSM Cscs GSM UCS2 Mobile Hardware flow control RTS/CTS flow control Flow ControlSoftware flow control XON/OFF flow control Communication between Customer Application and MC55 Unsolicited Result Code Presentation CSP Common PCN Handset Specification Cphs Errors and Messages Valuenum Configuration CommandsAT&Fvalue Active Profile AT&V Display current configuration1 AT&V responses AT&Vvalue +CGSMS Active Profile+FCLASS AT&Wvalue ERROR/+CME Error err ATQn ATQ Set result code presentation mode If value=0 If value=1 ATV Set result code format modeVerbose and numeric result codes ATVvalue Connect 14400/RLP Connect 2400/RLPConnect 4800/RLP Connect 9600/RLP ATXvalue ATX Set Connect result code format and call monitoring ATZvalue ATZ Set all current parameters to user defined profile +CFUN fun OK Error +CME ErrorAT+CFUN Set phone functionality AT+CFUN=? Funnum Rstnum AT+CFUN=1,1 AT+CFUN=0+CMTI SM,5 AT+CFUN? +CFUN AT+CFUN=1 URC Wake up the ME from Sleep modeFun=0 Smso MS OFF OK Atsmso Switch off mobile stationATSMSO=? Atsmso +GCAP name 10 AT+GCAP Request complete TA capabilities listAT+GCAP=? AT+GCAP AT+CMEE? 11 AT+CMEE Report mobile equipment errorOK Error AT+CMEE=? AT+CMEE=2 Summary of CME Errors related to GSM Summary of GPRS-related CME Errors Summary of CMS Errors related to GSM No +CNMA ACK Expected Mobile AT+CSCS? 12 AT+CSCS Select TE character setAT+CSCS=? Also see chapter Supported character sets ATSCFG? Atscfg Extended Configuration Setting+CME Error operation temporary not allowed ATSCFG=? Scfg PowerSaver/Mode9/Timeout, cfun9-timeout URC indication via Ring line ATSCFG=URC/Ringline, uri Cfun9-timeoutstr+CSCS HandOverStatusstr+CSCS AT+CSCS=GSM ATSCFG? SCFGAudio/AMR,enabledAT+CSCS=UCS2 SCFGAudio/AMR,0065006E00610062006C00650064 AT+CSCS=GSM SM20CallMode, CmgwMode ATSM20 Set M20 compatibility modeATSM20=? ATSM20? CmgwModenum CallModenum AT+CMER? Status Control CommandsAT+CMER Mobile Equipment Event Reporting AT+CMER=? +CIEV indDescr, indValue Mobile AT+CIND? AT+CIND Indicator controlAT+CIND=? Command Description AT+CPIN=9999 Also refer Call Status InformationStatenum ATSLCC, AT+CLCC or Atscni No Carrier ATD0123456+CIEV sounder,1 +CIEV call,1 +CIEV sounder,0 +CIEV call,0 ATSIND? Atsind Extended Indicator ControlATSIND=indDescr, Mode ATSIND=? User Issued +CEER locationID, reason, ssRelease AT+CEER Extended error reportAT+CEER=? AT+CEER AT+CHLD=2 OK AT+CHLD=3 +CEER 35,0,43 Cause Location ID for the extended error reportAT+clck=oi,1,0000,3 +CME Error incorrect password GSM release cause for L3 Radio Resource RR GSM release cause for Mobility Management MM Siemens release cause for L3 Radio Resource RR GSM release cause for L3 Call Control CC Siemens release cause for L3 Mobility Management MM Mobile Siemens release cause for L3 Call Control CC GSM Release cause for Supplementary Service Call Siemens release cause for L3 Advice of Charge AOC Mobile Siemens release cause for Session Management SM Siemens release cause for Embedded Netcore GSM cause for L3 Protocol module or other local causeSiemens release cause for Gprs API +CAUSE locationID, reason ATS18 Extended call release reportATS18? ATS18=n Connect 9600/RLP Busy +CPAS pas AT+CPAS Mobile equipment activity statusAT+CPAS=? AT+CPAS AT+WS46=n AT+WS46 Select wireless networkAT+WS46=? AT+WS46? AT\Qn Serial Interface Control CommandsError AT\Q Flowcontrol AT&Cvalue AT&C Set circuit Data Carrier Detect DCD function mode AT&Dvalue AT&D Set circuit Data Terminal Ready DTR function mode AT&Svalue AT&S Set circuit Data Set Ready DSR function mode ATEvalue ATE Enable command echo AT+ILRR? AT+ILRR Set TE-TA local rate reportingAT+ILRR=? Ratenum +IPR rate AT+IPR Set fixed local rateAT+IPR=? AT+IPR? Chronized after restarting the GSM engine see chapter Autobauding AT+CMUX? AT+CMUX Enter multiplex mode+CMUX mode AT+CMUX=? +++ Restrictions on Multiplex modeSubsetnum ATS10 ATS6ATS7 ATS8 AT+CFUN Second serial interface ASC1 AT+CPIN? Security CommandsAT+CPIN Enter PIN AT+CPIN=? Codetext PinstrNew pintext PH-C PUK What to do if PIN or password authentication fails?PH-SP PUK PH-C PIN Mobile +CPIN2 code AT+CPIN2 Enter PIN2AT+CPIN2=? AT+CPIN2? AT+CPIN2=12345678,8888 New pinstrAT+CPWD=P2,0000,8888 AT+CPIN2? +CPIN2 SIM PUK2 AT+CPIN2=8888 AT+CPBW=2,+493012345678,145,Charly +CME ErrorAT+CPBS=FD AT+CPBW=2,+493012345678,145,Charly Atspic Atspic Display PIN counterATSPIC=? ATSPIC? Facilitystr Counternum +CPIN SIM PUK +CPIN SIM PIN At+cpin=9999 OK at+cpin? At+cpin=4714 +CME Error incorrect password Atspic Spic AT+CLCK=? AT+CLCK=facility, mode, password, classAT+CLCK Facility lock Phone security locks set by client or factory Factory defined SIM locks SMS PasswordstrStatusnum Classnum AT+CPIN? +CPIN SIM PIN AT+CLCK=SC,2 AT+CLCK=PS,0,3333 AT+CPIN=1111AT+CPIN? +CPIN PH-SIM PIN AT+CPIN=3333 ATSLCK=? ATSLCK=facility, mode, password, classAtslck Facility lock +CME Error 16 +CME Error incorrect password AT+CPWD Change Password+CPWDlist of supported facility, password length AT+CPWD=facility, old password, new password Password length 4 digits Password length 4 to 8 digits New passwordstr Password lengthnumOld passwordstr AT+CPWD=PS,12345678 AT+CPWD=AO,0000,3333AT+CPWD=PS,1111,2222 AT+CPWD=PS,12345678,1111 ATSPWD=? Atspwd Change PasswordSPWDlist of supported facility, password length ATSPWD=facility, old password, new password ATIvalue Identification CommandsATI Display product identification information ATI AT+CGMI AT+CGMI Request manufacturer identificationAT+CGMI=? AT+GMI AT+GMI Request manufacturer identificationAT+GMI=? AT+CGMM AT+CGMM Request model identificationAT+CGMM=? AT+GMM AT+GMM Request TA model identificationAT+GMM=? Xx.yystr AT+CGMR Request revision identification of software statusAT+CGMR=? AT+CGMR Xx.yytext AT+GMR=?AT+GMR AT+CGSN AT+CGSN=? AT+GSN AT+GSN=? Imsi 10 AT+CIMI Request international mobile subscriber identityAT+CIMI=? AT+CIMI Call Status Information Call related Commands Call Status Information Textstr Connect text TA switches to data modeATA Answer a call ATA Connect text ATDnmgsmNo Dialtone Mgsmstr ATD03022222222 Memstr ATDmemn Originate call to phone number in memoryATDmemnmgsm ATDLD9 AT+CPBR=1,xxATDSM15 Memory Mobile ATDstrmgsm Sponding field Mobile ATDIn Atdi Mobile originated call to dialable Isdn number n Atdl Atdl Redial last telephone number used ATHn ATH Disconnect existing connection AT+CHUP 10 AT+CHUP Hang up callAT+CHUP=? ATS0=n CallATS0? Mobile ATS6=n 12 ATS6 Set pause before blind dialingATS6? ATS7=n ATS7? ATS8=n ATS8? ATS10=n CarrierATS10? ATP ATP Select pulse dialing ATOn ATO Switch from command mode to data mode / PPP online mode 18 +++ Switch from data mode to command mode ATT ATT Select tone dialing +CBST speed, name, ce 20 AT+CBST Select bearer service typeAT+CBST=? AT+CBST? 14400 bps +CRLP iws, mws, T1, N2, verx Parent data callAT+CRLP=? AT+CRLP? Verxnum +CLCC idx, dir, stat, mode, mpty, number, type, alpha 22 AT+CLCC List current calls of MEAT+CLCC=? AT+CLCC Typenum MptynumNumberstr Mobile Atslcc ATSLCC=?ATSLCC? Slcc n ATSLCC=n Mobile originated call MOC Mobile terminated call MTC Alphastr Traffic channel assignednum Slcc Ring AT+CR? 24 AT+CR Service reporting control+CR mode AT+CR=? Gprs ServstrREL Async AT+CRC=mode +CRC modeAT+CRC=? AT+CRC? Voice TypestrFAX AT+CSNS? +CSNS mode26 AT+CSNS Single Numbering Scheme AT+CSNS=? Mobile Scni id1,cs,number,type Scni id2,cs,number,type Atscni List Call Number InformationATSCNI=? Atscni String type phone number in format specified by type Slcd time Atslcd Display Last Call DurationATSLCD=? Atslcd Stcd time Atstcd Display Total Call DurationATSTCD=? Atstcd AT+COPN Network Service CommandsAT+COPN Read operator names AT+COPN=? +COPSmode, format, oper AT+COPS Operator selectionAT+COPS=? AT+COPS? Oper&V Operator Statnum Status Mobile +CREG n, stat, lac, ci AT+CREG Network registrationAT+CREG=? AT+CREG? =2 +CREGstat,lac,ci +CREG 1,0145,291A LacstrAT+CREG=2 AT+COPS=0 +CSQ rssi,ber AT+CSQ Signal qualityAT+CSQ=? AT+CSQ Mobile Atsmonc CME ErrorAtsmonc Cell Monitoring ATSMONC=? Channnum CellnumBSICnum ATMONI=period Atmoni Monitor idle mode and dedicated modeATMONI=? Atmoni Chann TS timAdv PWR DBm Q ChMod Atmoni responsesServing Cell Dedicated channel Chann rs DBm Plmn PWR Service states Mobile ATMONP=period Atmonp Monitor neighbour cellsATMONP=? Atmonp 100 Atmonp responsesChann DBm MCC MNC BCC ATSMONG=table , period Atsmong Gprs MonitorATSMONG=? Atsmong # Cell # Atsmong Cell Info TableGprs Monitor Bcch Pbcch PAT MCC MNC NOM RAC Sals view, line Atsals Alternate Line ServiceATSALS=? ATSALS? Sals ATSALS=1,1 Shom homezonestate Atshom Display HomezoneATSHOM=? Atshom SPLMnumeric, long alpha Atsplm Read the Plmn listATSPLM=? Atsplm Splr index1oper Splr index2oper Atsplr Read entry from the preferred operators listATSPLR=? ATSPLR=index1, index2 Operstr Indexnum Atsplw Write an entry to the preferred operators listATSPLW=? ATSPLW=index, oper AT+CACM? Supplementary Service CommandsAT+CACM Accumulated call meter ACM reset or query AT+CACM=? Passwdstr Acmstr Sacm n, acm, acmMax Atsacm Advice of charge and query of ACM and ACMmaxATSACM=? Atsacm Ccmstr Ffffff +CAMM acmmax AT+CAMM Accumulated call meter maximum ACMmax set or queryAT+CAMM=? AT+CAMM? MC55ATCV01.05 217 10/04 Confidential / Released AT+CAOC AT+CAOC Advice of Charge informationAT+CAOC=? AT+CAOC? Query CCM value AT+CCUG=n, index, info AT+CCUG Closed User GroupAT+CCUG=? +CCUGn, index, info Infonum AT+CCFC=? AT+CCFC=reason, mode , number, type, class, timeAT+CCFC Call forwarding number and conditions control Not reachable At+ccfc=0,3,+493012345678,145 Timenum At+ccfc=0,2 +CCFC 0,1 +CCFC 0,2 +CCFC 0,4 At+ccfc=4,2 +CME error operation not supported at+ccfc=5,2At+ccfc=0,0 At+ccfc=0,4 AT+CCWA=n, mode, class AT+CCWA Call WaitingAT+CCWA=? AT+CCWA? Scwa +CCWA calling number, type of number, class, , CLI validity CLI validitynum Calling numberstrType of numbernum At+ccwa=1,1 At+ccwa=1At+ccwa=,1 At+ccwa=,2 Udub AT+CHLD Call Hold and MultipartyAT+CHLD=? AT+CHLD=n At+chld=2 At+ccwa=1,1,1+CCWA +491791292364,145,32,,0 At+clcc +CLCC 1,0,0,0,0,03038639268,129 Ring ATAAt+clcc +CLIP number, type, , , , CLI validity AT+CLIP Calling line identification presentationAT+CLIP=? AT+CLIP? Suppress unsolicited result codes +CLIRn, m 10 AT+CLIR Calling line identification restrictionAT+CLIR=? AT+CLIR? Mnum +CPUC currency, ppu 11 AT+CPUC Price per unit and currency tableAT+CPUC=? AT+CPUC? AT+CPUC=EUR,0.10 AT+CPUC=EUR,0.10 +CME Error SIM PIN2 requiredPpustr AT+CPUC=EUR,0.10,8888 +CSSI code 12 AT+CSSN Supplementary service notificationsAT+CSSN=? AT+CSSN? Code 2num Code 1num AT+CUSD=n, str, dcs 13 AT+CUSD Supplementary service notificationsAT+CUSD=? AT+CUSD? Dcsnum Strstr AT+CGACT? Gprs Commands10.1 AT+CGACT PDP context activate or deactivate AT+CGACT=? Cidnum L2Pstr AT+CGANS=?AT+CGANS=response, L2P, cid Responsenum Mobile +CGATT state 10.3 AT+CGATT Gprs attach or detachAT+CGATT=? AT+CGATT? State=1 +CGAUTO n AT+CGANScommandAT+CGAUTO=? AT+CGAUTO? Below AT+CGDATA=? Connect No Carrier Error +CME Error10.5 AT+CGDATA Enter data state Parameter Description +CGDCONT cid, PDPtype, APN, PDPaddr, dcomp, hcomp 10.6 AT+CGDCONT Define PDP ContextAT+CGDCONT=? AT+CGDCONT? Dcompnum PDPtypestrAPNstr PDPaddrstr +CGPADDR cid, PDPaddress +CGPADDR OK Error +CME Error10.7 AT+CGPADDR Show PDP address AT+CGPADDR=? AT+CGQMIN? +CGQMIN cid, precedence, delay, reliability, peak, meanAT+CGQMIN=cid, precedence, delay, reliability, peak, mean AT+CGQMIN=? Precedencenum Precedence class Delaynum Delay classCid Meannum Reliabilitynum Reliability classPeaknum AT+CGQMIN= AT+CGQMIN? AT+CGQMIN=1,0 AT+CGDCONT=1,ip AT+CGQREQ=? 10.9 AT+CGQREQ Quality of Service Profile Requested+CGQREQ cid, precedence, delay, reliability, peak, mean AT+CGQREQ=cid, precedence, delay, reliability, peak, mean Reliabilitynum Peaknum AT+CGQREQ= AT+CGQREQ? AT+CGQREQ=1,0 +CGREG n, stat 10.10 AT+CGREG Gprs network registration statusAT+CGREG=? AT+CGREG? Stat=1 or stat=5 AT+CGSMS? 10.11 AT+CGSMS Select service for MO SMS messages+CGSMS service AT+CGSMS=? Circuit switched ATSGAUTH? Atsgauth Set type of authentication for PPP connectionATSGAUTH=? Sgconf llcpdulength, class Atsgconf Configuration of Gprs related ParametersATSGCONF=? ATSGCONF? Mobile Connect No Carrier PPP 10.15 ATD*99# Request Gprs serviceATD*99* calledaddress* L2P* cid # Calledaddressstr Cidnum ATD*98* cid # 10.16 ATD*98# Request Gprs IP service ATH 10.18 ATS0 Mobile AT+CGDCONT=1 Using Gprs AT commands ExamplesAT+CGDCONT=1,IP AT+CGDCONT=2,IP, internet.t-d1.gprs AT+CGACT= AT+CGQREQ=1,2AT+CGQREQ=1 AT+CGACT=1,2 By AT+CGDCONT Using the Gprs dial command ATDConnect EIA/TIA-578-A FAX CommandsFAX parameters AT+FCLASS Parameter Modnum 40 ms AT+FBADLIN=badlin 11.2 AT+FBADLIN Bad Line ThresholdAT+FBADLIN? Badlin AT+FBADMUL=badmul 11.3 AT+FBADMUL Error Threshold MultiplierAT+FBADMUL? Badmul Bor 11.4 AT+FBOR Query data bit orderAT+FBOR=? AT+FBOR? AT+FCIG=id AT+FCIG=?AT+FCIG? EIA/TIA-592-A AT+FCLASS=?AT+FCLASS? AT+FCLASS=n Mobile AT+FCQ=cq 11.7 AT+FCQ Copy Quality CheckingAT+FCQ=? AT+FCQ? AT+FCR=cr 11.8 AT+FCR Capability to receive Vr, br, wd, ln, df, ec, bf, st 11.9 AT+FDCC Query or set capabilitiesAT+FDCC=? AT+FDCC? AT+FDFFC=df 11.10 AT+FDFFC Data Compression Format ConversionAT+FDFFC=? AT+FDFFC? AT+FDIS=vr, br, wd, ln, df, ec, bf, st 11.11 AT+FDIS Query or set session parametersAT+FDIS=? AT+FDIS? AT+FDR 11.12 AT+FDR Begin or continue phase C data receptionConnect or If error related to ME functionality AT+FDT=df, vr, wd, ln 11.13 AT+FDT Data TransmissionAT+FDT Ppmnum 11.14 AT+FET End a page or documentAT+FET=ppm AT+FK 11.15 AT+FK Kill operation, orderly FAX abort AT+FLID=lid AT+FLID=?AT+FLID? Lid Gipsy Soft Protocolstack 11.17 AT+FMDL Identify Product ModelAT+FMDL? Siemens 11.18 AT+FMFR Request Manufacturer IdentificationAT+FMFR? Optnum 11.19 AT+FOPT Set bit order independentlyAT+FOPT=opt AT+FPHCTO=tout 11.20 AT+FPHCTO DTE Phase C Response TimeoutAT+FPHCTO? Tout V2.550 11.21 AT+FREV Identify Product RevisionAT+FREV? TIA/EIA-578 11.22 AT+FRH Receive Data Using Hdlc FramingAT+FRH=mod AT+FRM=mod 11.23 AT+FRM Receive DataAT+FRM=? AT+FRS=time 11.24 AT+FRS Receive Silence AT+FTH=mod 11.25 AT+FTH Transmit Data Using Hdlc Framing AT+FTM=mod 11.26 AT+FTM Transmit DataAT+FTM=? AT+FTS=time 11.27 AT+FTS Stop Transmission and Wait Vrfc 11.28 AT+FVRFC Vertical resolution format conversionAT+FVRFC=? AT+FVRFC? Cdatanum Short Message Service SMS CommandsSMS parameters Ackpdunum Mem3str LengthnumMem1str Mem2str Sctsnum PagenumPagesnum Pdunum Toranum StatstrTodanum Tooanum +CMGC mr, scts 12.2 AT+CMGC Send an SMS commandError +CMS Error AT+CMGC=? AT+CMGD=index OK Error +CMS Error12.3 AT+CMGD Delete SMS message AT+CMGD=? AT+CMGF? +CMGF mode12.4 AT+CMGF Select SMS message format AT+CMGF=? AT+CMGL 12.5 AT+CMGL List SMS messages from preferred storeAT+CMGL=? Mobile +CMGR stat, fo, ct , pid, mn, da, toda, length data 12.6 AT+CMGR Read SMS messagesAT+CMGR=? +CMGR stat, fo, mr, ra, tora , scts, dt, st data Mobile +CMGS mr, ackpdu 12.7 AT+CMGS Send SMS messageAT+CMGS=? +CMGS mr, scts Mobile +CMGW index 12.8 AT+CMGW Write SMS messages to memoryAT+CMGW=? AT+CMGW Command Description +CMSS mr, scts 12.9 AT+CMSS Send SMS messages from storageAT+CMSS=? AT+CMSS=index , da, toda AT+CNMA=n AT+CNMA=?AT+CNMA Mobile AT+CNMI? 12.11 AT+CNMI New SMS message indicationsAT+CNMI=? +CDS fo, mr, ra, tora, scts, dt, st +CBM lengthCRLFpdu+CBM sn, mid, dcs, page, pagesCRLFdata +CDS lengthCRLFpdu Ward them directly to the TE Mobile AT+CPMS? OK Error Error +CMS Error12.12 AT+CPMS Preferred SMS message storage AT+CPMS=? Total2num Used2numUsed3num Total1num Mobile +CSCA sca, tosca 12.13 AT+CSCA SMS service centre addressAT+CSCA=? AT+CSCA? +CSCB mode, mids, dcss 12.14 AT+CSCB Select Cell Broadcast Message IndicationAT+CSCB=? AT+CSCB? Dcssstr Not show pid , mn , da , toda , length or cdata 12.15 AT+CSDH Show SMS text mode parametersAT+CSDH=? AT+CSDH? +CSMPfo, vp/ scts, pid, dcs 12.16 AT+CSMP Set SMS text mode parametersAT+CSMP=? AT+CSMP? Pidnum AT+CSMS? 12.17 AT+CSMS Select Message ServiceAT+CSMS=? Mobile Terminated Messages Type not supported Type supported Atslms Atslms List SMS Memory StorageATSLMS=? Used2num ATSMGL=stat ATSMGL=?Atsmgl ATSMGO? Smgo n, modeError CME Error ATSMGO=? SMS overflow presentation mode ATSMGR=index Atsmgr Read SMS message without setting status to REC ReadATSMGR=? Smgr SSCONFra Atssconf SMS ConfigurationATSSCONF=? ATSSCONF? Mobile SSDAda Atssda Set SMS Display AvailabilityATSSDA=? ATSSDA? Danum Ssmss seq Atssmss Set Short Message Storage SequenceATSSMSS=? ATSSMSS? AT+CRSM=? SIM related Commands13.1 AT+CRSM Restricted SIM Access AT+CRSM=command, fileID, P1, P2, P3, data Sw2num FileIDnumDatastr Sw1num Scks mode, SimStatus Atscks Query SIM and Chip Card Holder StatusATSCKS=? ATSCKS? Scks SimStatusnum&VATSCKS=1 Scid cid Atscid Display SIM card identification numberATSCID=? Atscid +CXXCID cid 13.4 AT+CXXCID Display card IDAT+CXXCID=? AT+CXXCID ATSSTA? SIM Application Toolkit SAT CommandsAtssta SAT Interface Activation ATSSTA=? SatProfilestr AlphabetnumAllowedInstancenum Sstn Sstn SAT NotificationSstn cmdType Sstn cmdTerminateValue CmdTerminateValuenum CmdTypenum Sstgi state, cmdType Atsstgi SAT Get InformationATSSTGI=? ATSSTGI? Related Proactive Command Sstr state, cmdType Atsstr SAT ResponseATSSTR=? ATSSTR? InputStringstr InputNumbernum Sort Order for Phonebooks Phonebook Commands AT+CPBR=location1, location2 15.2 AT+CPBR Read from PhonebookAT+CPBR=? +CPBR 1-maxloc,nlength, tlength Maxlocnum Location1numLocation2num Typenum Address type +CPBR2,+777777,145,Bill +CPBR3,+888888,145,Arthur Tlengthnum +CPBS storage, used, total 15.3 AT+CPBS Select phonebook memory storageAT+CPBS=? AT+CPBS? Totalnum StoragestrUsednum AT+CPBW=location, number, type, text 15.4 AT+CPBW Write into PhonebookAT+CPBW=? +CPBW 1-maxloc,nlength, list of supported types, tlength Locationnum AT+CPBW=1 AT+CPBW=,+431234567,145,international Spbc index Atspbc Search the first entry in the sorted telephone bookATSPBC=? ATSPBC=schar Scharstr+CSCS ATSPBD=storage Atspbd Purge phonebook memory storageATSPBD=? Storagestr ATSPBG=index1, index2, RealLocReq Atspbg Read current Phonebook entriesATSPBG=? Spbg 1-used,nlength, tlength RealLocReqnum ATSPBG=1,33 Spbg 1-33,20,17 +CPBR 27,+999999,145,Arthur ATSPBG=1,33,1AT+CPBR=27 ATSPBS=value, RealLocReq Atspbs Step through the selected phonebook alphabeticallyATSPBS=? Index-c=index-b+1 Counter valueIndex-b=index-a+1 Internal-counternum +CPBR27,+999999,145,Arthur At&f Atsdld Atsdld Delete the last number redial memoryATSDLD=? Audio programming model Audio Commands Valnum ATL Set monitor speaker loudnessATLval ATMval ATM Set monitor speaker mode AT+CLVL? 16.4 AT+CLVL Loudspeaker volume levelAT+CLVL=? AT+CFUN=1,1 AT+CMUT? 16.5 AT+CMUT Mute controlAT+CMUT=? Duration 16.6 AT+VTD Tone durationAT+VTD=? AT+VTD? AT+VTS=dtmf, duration 16.7 AT+VTS Dtmf and tone generationAT+VTS=? AT+VTS=dtmfString Mobile Saic io, mic, ep Atsaic Audio Interface ConfigurationATSAIC=? ATSAIC? Microphone selection ATSNFA? Atsnfa Set or query of microphone attenuationATSNFA=? OK atsnfa? Snfa OK atsnfa? Snfa OK atsnfs=4 OK atsnfa=1 OK atsnfi? Snfi 5,1 Atsnfd Atsnfd Set audio parameters to manufacturer default valuesATSNFD=? Snfi inBbcGain, inCalibrate Atsnfi Set microphone path parametersATSNFI=? ATSNFI? Mobile ATSNFM=? Atsnfm Set microphone audio path and power supplySnfm MicSwitch, MicVccState ATSNFM=MicSwitch , MicVccCtl MicVccStatenum MicSwitchnumMicVccCtlnum OutBbcGainnumSNFW Atsnfo Set audio output = loudspeaker path parameterATSNFO=? ATSNFO? OutStepnum OutCalibratenumSNFW Snfpt pt Atsnfpt Set progress tonesATSNFPT=? ATSNFPT? Snfs audMode Atsnfs Select audio hardware setATSNFS=? ATSNFS? Atsnfd restores audMode ATSNFS=4 ATSNFS=4 ATSAIC?ATSNFS=2 ATSAIC? Atsnfw ATSAIC=2,1,1 Snftty state Atsnftty Switch audio path to TTY/CTM modeATSNFTTY=? ATSNFTTY? Audio path is in normal speech mode Snfv outStep Atsnfv Set loudspeaker volumeATSNFV=? ATSNFV? MC55ATCV01.05 420 10/04 Confidential / Released ATSNFW=? Atsnfw Write audio setting in non-volatile store Atsrtc Atsrtc Ring tone configurationATSRTC=? ATSRTC? Volumenum Mobile AT+CALA? Hardware related Commands17.1 AT+CALA Set alarm time AT+CALA=? +CALA text Sysstart Alarm Mode +CALA text +CALA Good Morning AT+CALA=04/05/31,093000,0,0,Good Morning AT+CALA=04/05/20,083000 Summary of AT commands available in Alarm modeSysstart Alarm Mode AT+CALA=04/05/31,085000 AT+CCLK? Error OK17.2 AT+CCLK Real Time Clock AT+CCLK=? SBC bcs, bcl, mpc Atsbc Battery charging / discharging and charge controlATSBC=? ATSBC? Bcsnum SBC Undervoltage Currentnum BclnumMpcnum SBV value Atsbv Battery/Supply VoltageATSBV=? Atsbv ATSCTM=n ATSCTM=?ATSCTM? Sctm n, m Sctmb m Sctma m Sctmb Sctma SSYNCmode Atssync Configure Sync PinATSSYNC=? ATSSYNC? Atssync parameter mode= ME status indicated by status LED patterns 18.1 A/ Repeat previous command line Miscellaneous Commands ATS3=n 18.2 ATS3 Write command line termination characterATS3? ATS4=n 18.3 ATS4 Set response formatting characterATS4? ATS5=n 18.4 ATS5 Write command line editing characterATS5? ATDmemn Restricted access to SIM data after SIM PIN authenticationAppendix See AT+CLIR List of *# CodesImei OK Like +CCWA *see AT+CCWA PAD FAX SMS SMS+FAX Mobile Available AT Commands and Dependency on SIM PIN ATDmemn ATDn ATDstr ATS7 ATS8 ATS10 ATP ATO ATD*99# ATD*98# Short Message Service SMS Commands AT+CRSM Atscks Atscid AT+CXXCID AT+CALA AT+CCLK Atsbc Atsbv Atsctm Atssync AT Command Settings storable with AT&W Show Mode, mt, bm, ds, bfr ATS0 Atslcc AT+CR Factory Default Settings Restorable with AT&F Mode=0, mt=0, bm=0, ds=0, bfr=1 Format=0View=0 =0, m=0 ATS3 Summary of Unsolicited Result Codes URC Sstn Smgo mode+CMT oa, scts, tooa, fo, pid, dcs Sca, tosca, lengthCRLFdata Alphabetical List of AT Commands AT+CMGC AT+FBADLIN 23, Atssta ATD*99# ATT

Siemens MC55 manual Mobile

Models: MC55

mobile