MC55 AT Command Set
4.6 AT+ILRR s
m
obil
e
MC55_ATC_V01.05 Page 94 of 469 2/10/04
Confidential / Released
4.6 AT+ILRR Set TE-TA local rate reporting
The command AT+ILRR controls whether or not the intermediate result code "+ILRR" is transmitted from the
DCE to the DTE.
Syntax

Intermediate Result Code

+ILRR: <rate>
Indicates port rate setting on connection.
Command Description
The write command determines whether or not an intermediate result code of local rate is report ed at connection
setup. The rate is reported before the final result code of the connection is transmitted to the TE.

Test Command
AT+ILRR=?
Response(s)
+ILRR: (list of supported <value>s)
OK
Read Command
AT+ILRR?
Response(s)
+ILRR: <value>
OK
Write Command
AT+ILRR=<value>
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % ! % ! !
Reference(s)
V.25ter