MC55 AT Command Set

12.21 AT^SMGR

s

mobile

12.21AT^SMGR Read SMS message without setting status to REC READ

Syntax

Test Command

AT^SMGR=?

Response(s)

^SMGR:

OK

Write Command

AT^SMGR=<index>

Response(s)

see AT+CMGR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

SIEMENS

Notes

The AT^SMGR command is a specific Siemens command with the same syntax as AT+CMGR Read SMS mes- sage. The only difference is that the status ''REC UNREAD'' of a short message is not overwritten to ''REC READ''.

This command can be used only after the sms data from the SIM have been read successfully for the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the sms read commands will result in ''+CME Error: 14'' (SIM busy)

MC55_ATC_V01.05

Page 350 of 469

2/10/04

Confidential / Released

 

 

Page 350
Image 350
Siemens MC55 manual Atsmgr Read SMS message without setting status to REC Read, Atsmgr=?, Smgr, ATSMGR=index, See AT+CMGR