Siemens MC55 SIM Application Toolkit SAT Commands, Atssta SAT Interface Activation, Atssta=?

MC55 AT Command Set

14. SIM Application Toolkit (SAT) Commands

s

mobile

14.SIM Application Toolkit (SAT) Commands

This chapter offers a brief reference of commands and responses related to the MC55's SIM Application Toolkit (SAT) implementation. Detailed information is available with the document "Remote-SAT User Guide" [4]. Please contact the Wireless Modules Application Engineering Department at Siemens AG for details.

ETSI specification GSM 11.14 [19] defines SAT in detail.

SAT allows for the execution of applications provided by a Subsciber Identity Module (SIM). Usually SIM cards are used for storing GSM network provider and user specific data, e.g. phonebook entries and Short Messages (SMS). However, a SIM card may also hold a SIM Application.

Since the MC55 has SAT functionality it is able to execute the commands issued by applications implemented on a network provider specific SIM card.

Two groups of commands are used between the ME and the SIM Application:

•Proactive Commands are issued to the MC55's SAT from the SIM Application, such as "DISPLAY TEXT".

•Envelope Commands are responded to the SIM Application from the MC55, such as "MENU SELECTION".

14.1AT^SSTA SAT Interface Activation

Syntax

Test Command

AT^SSTA=?

Response(s)

^SSTA:(list of supported <state>s), (list of supported <Alphabet>s)

OK

Read Command

AT^SSTA?

Response(s)

^SSTA: <state>, <Alphabet>, <allowedInstance>, <SatProfile>

OK

Write Command

AT^SSTA=<mode>[, <Alphabet>]

Response(s)

OK

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

SIEMENS

MC55_ATC_V01.05	Page 362 of 469	2/10/04
Confidential / Released