Siemens MC55 manual ATZ Set all current parameters to user defined profile, ATZvalue

MC55 AT Command Set

2.7 ATZ

s

mobile

2.7 ATZ Set all current parameters to user defined profile

Syntax

Exec Command

ATZ[<value>]

Response(s)

OK

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

V.25ter

Command Description

TA sets all current parameters to the user profile stored with AT&W. If a connection is in progress, it will be termi- nated.

All defined GPRS contexts which are not activated or not online will be undefined (see AT+CGDCONT, AT+CGQREQ and AT+CGQMIN command).

The user defined profile is stored to the non-volatile memory.

Parameter Description

<value>(num)

[0] Reset to user profile

Notes

•First the profile will be set to factory default (see AT&F). If there is a valid user profile (stored with AT&W), this profile will be loaded afterwards.

•Any additional commands on the same command line may be ignored. A delay of 300 ms is required before next command is sent, otherwise "OK" response may be corrupted.

MC55_ATC_V01.05	Page 38 of 469	2/10/04
Confidential / Released