MC55 AT Command Set
5.3 AT^SPIC s
m
obil
e
MC55_ATC_V01.05 Page 110 of 469 2/10/04
Confidential / Released
5.3 AT^SPIC Display PIN counter
Syntax
Command Description
The read command returns an identification of the currently requir ed password, e.g. the PIN, PUK, PH-SIM PUK
etc. The <counter> returned by the execute command refers to this password. In case there is no currently
required password (the responses to "AT+CPIN?" and "AT+CPIN2?" both read "READY"), the read command
nevertheless identifies the password to which the execute command response r efers.
The execute command returns the number of attempts still available for entering the currently required password,
e.g. the PIN, PUK, PH-SIM PUK etc. To check whether or not you need to enter a password usecommands
AT+CPIN? , Read command AT^SPIC? and AT+CPIN2?.
Test Command
AT^SPIC=?
Response(s)
OK
Read Command
AT^SPIC?
Response(s)
^SPIC: <code>
OK
Exec Command
AT^SPIC
Response(s)
^SPIC: <counter>
OK
Write Command
AT^SPIC=<facility>
Response(s)
^SPIC: <counter>
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS