MC55 AT Command Set

15.4 AT+CPBW

s

mobile

15.4AT+CPBW Write into Phonebook

This command serves to write onto an entry of the phonebook selected with AT+CPBS. It can be used only after the phonebook's data has been read successfully from the SIM. Reading starts after successful SIM authentica- tion has been performed and may take up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook commands will result in "+CME Error: SIM busy".

Syntax

Test Command

AT+CPBW=?

Response(s)

+CPBW: (1-<maxloc>),<nlength>, (list of supported <type>s), <tlength>

OK ERROR +CME ERROR

Write Command

AT+CPBW=[<location>][, <number>[[, <type>][, <text>]]]

Response(s)

OK ERROR +CME ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

GSM 07.07

Command Description

The test command returns the location range supported by the current storage, the maximum length of <num- ber> field, the range of supported <type> values and the maximum length of <text> field. Note: The length may not be available while SIM storage is selected. If storage does not offer format information, the format list contains empty parenthesizes.

The write command fills a phonebook entry at memory location <location> of the active storage selected with AT+CPBS.

If <storage>="FD" (SIM fixed dialling numbers) is selected, PIN2 authentication has to be performed prior to any write access.

If no <location> is given, the first free entry will be used.

If <location> is given as the only parameter, the phonebook entry specified by <location> is deleted. If write attempt fails "+CME ERROR" is indicated.

MC55_ATC_V01.05

Page 376 of 469

2/10/04

Confidential / Released

 

 

Page 376
Image 376
Siemens MC55 manual 15.4 AT+CPBW Write into Phonebook, At+Cpbw=?, +CPBW 1-maxloc,nlength, list of supported types, tlength