Siemens MC55 manual Atsgconf Configuration of Gprs related Parameters, Atsgconf=?, Atsgconf?

MC55 AT Command Set

10.13 AT^SGCONF

s

mobile

10.13AT^SGCONF Configuration of GPRS related Parameters

Syntax

Test Command

AT^SGCONF=?

Response(s)

^SGCONF: (list of supported <llc_pdu_length>s), (list of supported <class>es)

OK

Read Command

AT^SGCONF?

Response(s)

^SGCONF: <llc_pdu_length>, <class>

OK

Write Command

AT^SGCONF=[<llc_pdu_length>] [, <class>]

Response(s)

OK ERROR +CME ERROR

PIN	ASC0	ASC1	MUX1	MUX2	MUX3
￿	￿	￿	￿	￿	￿
Reference(s)
SIEMENS

Parameter Description
<llc_pdu_length>(num)
LLC-PDU-length
0	no negotiation with network (500 will be used)
140...1520(P)	lower values diminish performance

<class>(num)

GPRS Multislot Class. The parameter can be changed only when the MT is detached, otherwise ''CME ERROR: operation temporary not allowed'' will be returned. The value can be one of the classes indicated with the Test command.

MC55_ATC_V01.05	Page 269 of 469	2/10/04
Confidential / Released