Heritage Series ADSL Bridge/ Router

81

Command Sets for Command Line Interface

arp add flane 192.168.2.108 00:20:2b:03:0a:72 # 10m58s

# ether ARP table is empty

(The last example shows that the MAC address for 192.168.2.108 has been automatically added again, having been discovered by means of the ARP protocol.)

2. config

Syntax:

config [save]

Description:

Displays the IP configuration (not including the “snmp” configuration), or saves it in flash memory. The functionality of the “config” command is also accessible in the standard way through the config process (e.g. “config print ip”), if that process is present. However, when accessed through the config process, the “snmp” configuration is included.

Example:

DSL> ip config

device add ether ether //nice mtu 1500 192.168.2.1 device add vlane ether //lane mtu 1500 192.168.55.1 subnet add vlane.home . 192.168.55.0 ff:ff:ff:00 subnet add ether.home . 192.168.2.0 ff:ff:ff:00 rip send ether 2

rip send vlane 2 rip accept ether 1 2 rip accept vlane 1 2 autoloop on

route add default 0.0.0.0 192.168.2.7 00:00:00:00 2 # MAN relay ether ether

relay ether vlane relay vlane vlane ipatm lifetime 60

#IP host table:

#Port table: router 520/UDP snmp 161/UDP tftp 69/UDP telnet 23/TCP DSL> ip config save

Updating flash filing system ...

done

ip: configuration saved

Page 86
Image 86
Heritage Kayaks Heritage Series manual Config, DSL ip config