Heritage Series ADSL Bridge/ Router | 91 | |
Command Sets for Command Line Interface | ||
To disable forwarding, use the “norelay” command. |
| |
Configuration saving saves this information. By default all |
| |
forwarding is disabled. |
| |
Example: |
|
|
DSL> ip relay | is being performed |
|
No relaying |
| |
DSL> ip relay ether vlane forward |
| |
relay ether | vlane forward |
|
DSL> ip relay ether forward |
| |
relay ether | ether |
|
relay ether | vlane forward |
|
DSL> ip relay ether vlane |
| |
relay ether | ether |
|
relay ether | vlane |
|
DSL> ip relay all |
| |
relay ether | ether |
|
relay ether | vlane |
|
relay vlane | vlane |
|
18. rip accept
Syntax:
rip accept [all<i/f>] [none<version>*]
Description:
Controls for which version or versions of RIP (RIP version 1, RFC 1058, or RIP version 2, RFC 1723) TCP/IP will accept incoming information on each interface.
Configuration saving saves this information. By default both RIP versions are accepted on all interfaces ( “rip accept all 1 2 ”).
Example:
DSL> ip rip accept all 1 2
DSL> ip rip accept ether 2
DSL> ip rip allowed
rip send ether none rip send vlane none rip accept ether 2 rip accept vlane 1 2
