22Installing and Configuring your ADSL Router
2.4Configuring the Router
There is some setup required to get your ADSL Router working properly. The configuration of the ADSL Router can be accessed in three ways:
Using TELNET via Ethernet interface
Using terminal program via serial console port
Using ADSL Configuration Tool (ACT) via serial console port
2.4.1 Using TELNET via Ethernet interface
To access the command line interface via Ethernet interface, you can use TELNET to log in the Router from the local Ethernet network using the Ethernet IP address that assigned to your ADSL Router. The Ethernet IP of the ADSL Router is default set to 192.168.7.1.
1.Select Start->Programs->MS-DOS Prompt.
2.Find the IP address of the Router’s Ethernet port. Then use TELNET to login the Router. For example, TELNET 192.168.7.1
3.You will see that a telnet dialog pops up asking for password (case sensitive), then enter DSL ↵ (“DSL” for example in here, instead of your password that is same as your ADSL Router’s Model)
