Heritage Series ADSL Bridge/ Router | 75 |
Command Sets for Command Line Interface |
18. spanning status
Syntax:
spanning status
Description:
Reports the status of the spanning tree. If spanning tree operation is disabled, a message is printed to that effect and no other information is displayed. When spanning tree operation is enabled, the following information is displayed:
•The identifier of the bridge.
•The identifier of the root bridge.
•The root port for this bridge.
•The root path cost: how far the bridge is from the root
•The various spanning tree time values as defined by the current root bridge:
•The maximum age of spanning tree information before it is discarded: max age time.
•The amount of time between configuration protocol packets: hello time.
•The amount of time delay when ports are changing state: forward delay time.
•For each port:
•The identifier of the designated bridge
•The identifier of the designated port for the designated bridge
•The identifier of the designated root bridge
Example:
DSL bridge> spanning status
