96 | Command Sets for Command Line Interface |
route add testnet2 192.168.102.0 192.168.2.34 ff:ff:ff:00 1 # MAN 58s/1m via ether *
route add testnet1 192.168.101.0 192.168.2.34 ff:ff:ff:00 1 # MAN via ether route add default 0.0.0.0 192.168.2.3 00:00:00:00 1 # MAN via ether
28. routeflush
Syntax:
routeflush [<i/f>] [all]
Description:
Removes routes from the route table. If “<i/f>” is specified, only routes through the named interface are removed. If “all” is not specified, only host routes (those with a mask of ff:ff:ff:ff) are removed. The “routeflush” command is “hidden”, not shown by “ip help”.
Configuration saving saves this information.
Example:
DSL> ip routeflush ether all
DSL> ip routeflush
29. routes
Syntax:
routes
Description:
Lists routes. (The same as “route”, with no parameters.)
30. stats
Syntax:
stats arpicmpiptcpudp [reset] stats help [<cmd>all]
Description:
Displays or clears a subset of IP statistics.
Example:
DSL> ip stats udp
ip: UDP receptions delivered to users: 0
ip: UDP receptions with no users: 170
ip: Otherwise discarded UDP receptions: 0
ip: Transmitted UDP packets: 35 DSL> ip stats udp reset
DSL> ip stats udp
ip: UDP receptions delivered to users: 0
ip: UDP receptions with no users: 0
ip: Otherwise discarded UDP receptions: 0
ip: Transmitted UDP packets: 0
