Heritage Series ADSL Bridge/ Router

23

Installing and Configuring your ADSL Router

4.Then you will see the following prompt, DSL > (“DSL” for example in here, instead of your ADSL Router’s Model).

5.Now you are ready to configure the Router by using command. Please contact your ISP/NSP to obtain the detail command sets of your Router. If the Router does not return any message, refer to Appendix B for troubleshooting information.

2.4.2Using terminal program via serial console port

A terminal can be connected directly to the Serial console port. This requires the use of a terminal emulation software package such as Microsoft HyperTerminal. By default setting, the Router is configured to communicate at a baud rate of 9600. Any standard terminal that support baud rate of 9600 can be connected to the Router’s console port. Please configure your serial port as:

BPS :

 

9600

Data bits:

8

Parity

:

None

Stop Bits:

1

Flow Control :

None

Following steps provide the instructions to log on to the Router via Microsoft HyperTerminal.

1.Select Start->Programs->Accessories->HyperTerminal

Page 28
Image 28
Heritage Kayaks Heritage Series manual Using terminal program via serial console port