MC55 AT Command Set

11.6 AT+FCLASS

s

mobile

If <n> is set to 1 or 2, all incoming calls will be answered as fax calls with ATA, if ATA is issued on multiplexer channel 1 resp. ASC0. For calls explicitly signalled as voice or data calls, this procedure will fail with result code "NO CARRIER", but the call in question will continue to ring.

It is possible to change the setting of <n> to 0 while the call is ringing, and accept the call normally afterwards with ATA.

MC55_ATC_V01.05

Page 289 of 469

2/10/04

Confidential / Released

 

 

Page 289
Image 289
Siemens MC55 manual Mobile