MC55 AT Command Set

2.2 AT&V

s

mobile

2.2AT&V Display current configuration

Syntax

Exec Command

AT&V[<value>]

Response(s)

ACTIVE PROFILE:

... (see section 2.2.1)

OK

 

PIN

ASC0

ASC1

MUX1

MUX2

MUX3

 

 

￿

￿

￿

￿

￿

￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reference(s)

V.25ter

Command Description

TA returns the current parameter setting. The configuration varies depending on whether or not PIN authentica- tion has been done and whether or not Multiplex mode is enabled (see AT+CMUX).

Parameter Description

<value>(num)

[0]

Profile number

Notes

The parameters of AT^SMGO can only be displayed after the SMS data from the SIM have been read success- fully for the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to read the parameter will result in empty values.

The parameter of AT+CSDH will only be displayed in SMS text mode, see AT+CMGF

2.2.1AT&V responses

The following tables show four different kinds of responses depending on whether or not the PIN is entered and whether or not the Multiplex mode is enabled (see AT+CMUX).

MC55_ATC_V01.05

Page 31 of 469

2/10/04

Confidential / Released

 

 

Page 31
Image 31
Siemens MC55 manual AT&V Display current configuration, 1 AT&V responses, AT&Vvalue, Active Profile, See section