Siemens MC55 manual Ward them directly to the TE

MC55 AT Command Set

12.11 AT+CNMI

s

mobile

2	Buffer unsolicited result codes in the TA when TA-TE link is reserved (e.g. in
	on-line data mode) and flush them to the TE after reservation. Otherwise for-
	ward them directly to the TE.
3	Forward unsolicited result codes directly to the TE. TA-TE link specific inband
	technique used to embed result codes and data when TA is in on-line data
	mode.

<mt>(num)(&W)(&V)

Rules for storing received SMS depend on the relevant data coding method (refer to GSM 03.38), preferred memory storage (AT+CPMS) setting and this value.

Note: If AT command interface is acting as the only display device, the ME must support storage of class 0 mes- sages and messages in the message waiting indication group (discard message)

[0](&F)	No SMS-DELIVER indications are routed to the TE.
1	If SMS-DELIVER is stored in ME/TA, indication of the memory location is
	routed to the TE using unsolicited result code:
2	SMS-DELIVERs, except class 2 messages and messages in the message
	waiting indication group (store message) are routed directly to the TE using
	unsolicited result code:
3	Class 3 SMS-DELIVERs are routed directly to the TE using unsolicited result
	codes defined in <mt>=2. Messages of other data coding schemes result in
	indication as defined in <mt>=1.

<bm>(num)(&W)(&V)

Rules for storing received CBMs depend on the relevant data coding method (refer to GSM 03.38), the setting of Select CBM Types (AT+CSCB) and this value:

[0](&F)	No CBM indications are routed to the TE.
2	New CBMs are routed directly to the TE using unsolicited result code:
3	Class 3 CBMs are routed directly to TE using unsolicited result codes defined
	in <bm>=2.
<ds>(num)(&W)(&V)
[0](&F)	No SMS-STATUS-REPORTs are routed to the TE.
1	SMS-STATUS-REPORTs are routed to the TE using unsolicited result code:
2	If SMS-STATUS-REPORT is routed into ME/TA, indication of the memory
	location is routed to the TE using unsolicited result code:
<bfr>(num)(&W)(&V)
[1](&F)	TA buffer of unsolicited result codes defined within this command is cleared
	when <mode> 1...3 is entered.

<index>(num)

integer type; value in the range of location numbers supported by the associated memory

Notes

•Each time an SMS or Cell Broadcast Message is received, the Ring Line goes Logic "1" for one second.

MC55_ATC_V01.05	Page 332 of 469	2/10/04
Confidential / Released