MC55 AT Command Set
2.13 AT^SCFG s
m
obil
e
MC55_ATC_V01.05 Page 59 of 469 2/10/04
Confidential / Released
CIEV Call Status Indication
This parameter can be used to control the behaviour of URC "+CIEV":call. See also AT+CIND, AT+CMER and
Call Status Information.
Parameter is global for all interfaces and will not be reset by AT&F.
“restricted“(P) URC ""+CIEV": call" will be issued only when a Call Status transition ends in
state "active" or "unknown" (see Call Status Information) for a call in
the list of active calls
“verbose“ URC ""+CIEV": call" will be issued when any state transition (including transi-
tions beginning or ending in state "unknown") occurs in the list of activ e calls,
or when a traffic channel is established
SLCC Call Status Indication
This parameter can be used to control the behaviour of URC "^SLCC". See also AT^SLCC and Call Status
Information.
Parameter is global for all interfaces and will not be reset by AT&F.
“restricted“ URC "^SLCC" will be issued only when a Call Status transition ends in state
"active" or "unknown" (see Call Status Information) for a call in the list
of active calls
“verbose“(P) URC "^SLCC" will be issued when any state transition (including transitions
beginning or ending in state "unknown") occurs in the list of active calls, or
when a traffic channel is established.
Note
• Parameters "GPRS/ATS0/withAttach" (<gaa>) and "GPRS/RingOnIncomingData" (<groid>) are available
only for modules supporting GPRS.
Examples
EXAMPLE 1
Usage of "Audio/AMR":
<succ>(str)(+CSCS)
<sucs>(str)(+CSCS)
AT+CSCS="UCS2"
Switch to UCS2 character set.
OK
AT^SCFG?
Query all parameters.
...
^SCFG:"Audio/AMR","0065006E00610062006C006 50064"
...
OK
AT+CSCS="GSM"
OK
AT^SCFG?
...
^SCFG:"Audio/AMR","enabled"
AMR will be used for any operator.
...