Siemens MC55 manual Atsstgi SAT Get Information, Atsstgi=?, Atsstgi?, Sstgi state, cmdType

MC55 AT Command Set

14.3 AT^SSTGI

s

mobile

14.3AT^SSTGI SAT Get Information

Regularly this command is used upon receipt of an URC "^SSTN" to request the parameters of the Proactive Command.

Then the TA is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Command has been executed. AT^SSTR will also provide any user information, e.g. a selected menu item. The Proactive Command type value specifies to which "^SSTN" the command is related.

Syntax

Test Command

AT^SSTGI=?

Response(s)

^SSTGI:(list of supported <state>s), (list of supported <cmdType>s)

OK

Read Command

AT^SSTGI?

Response(s)

^SSTGI: <state>, <cmdType>

OK

Write Command

AT^SSTGI=<cmdType>

Response(s)

OK

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

SIEMENS

Parameter Description

<state>(num)

MC55 Remote-SAT interface states

0	RESET
1	OFF
2	IDLE
3	PAC
4	WAIT
MC55_ATC_V01.05	Page 366 of 469	2/10/04
Confidential / Released