5.3 USING BATTERY TRAY
1. Push the lock of the battery tray, and open the lid.
Figure 8. Removing the battery case lid
2.Install the AA battery cell.
(We recommend you use alkaline batteries.)
Figure 9. Installing the battery pack
3. Confirm the polarity of the batteries.
4. Close the lid.
5. Attach the battery tray to transceiver, and turn the lock screw clockwise 1/4 turn.
Figure 10. Confirm the polarity
CAUTION
It is not recommended to use
5.3 OPERATING CWC260 BATTERY CHARGER
KC | OL |
| |
| PO | ||
NE | |||
| |||
Figure 11. Plugging the DC plug
1.Turn the transceiver off.
2.Plug the DC plug of CWC260 into the battery.
3.Plug the wall charger into a 120 VAC wall outlet.
4.The indicator lights, and charging begins.
5.Remove the DC plug from the battery when charging time has passed.
page 18 | Owner’s Manual | HX260S |
