Standard Horizon HX260S owner manual Resetting the TRANSCEIVER’S Microprocessor

4.14 OPERATING ON CHANNEL 67

When channel 67 is used for navigational bridge-to-bridge traffic between ships, high power may be used temporarily in the USA mode by pressing the H/L key before transmitting. When the PTT switch is released, the transceiver will revert to low power.

4.15 RESETTING THE TRANSCEIVER’S MICROPROCESSOR

Resetting the microprocessor restores the initial, factory supplied conditions in the transceiver. These are called the default conditions. To reset the microprocessor, first turn the transceiver off. Then while pressing and holding the WX and SCAN keys, turn the transceiver on. The default conditions are:

•No channel numbers are in SCAN memory.

•Channel 16 will be selected when the transceiver is turned on.

•WX channel 01 will be recalled when the WX key is pressed.

page 16 Owner’s Manual HX260S