BenQ PE7700 Selecting a preset mode, Selecting aspect ratio, Other adjustments, English

1. Selecting a preset mode

Select a preset mode on the remote control, or in Picture > Preset Mode menu. There are 5 modes available for each input. These modes are with preset values suitable for various projection purposes.

Preset Cinema Mode: with well-balanced color saturation and contrast but lowest brightness. It is suitable for enjoying dark movie contents in a totally dark environment.

Preset Home Theater Mode: is brighter than Cinema Mode. A little bit ambient light is allowed when using the projector with this mode.

Preset Family Room Mode: Brightness is emphasized in this mode. It is good for watching TV program, playing games or seeing bright movies.

Preset Photo Mode: designed for viewing digital pictures in a living room.

Preset Gaming Mode: is suitable for playing video games in a bright living room.

2. Selecting aspect ratio

The aspect ratio is the ratio of image width to image height. HDTV and most

DVDs are 16:9, which is the default for this projector. Most TV shows are 4:3.

Change the image ratio using the Aspect buttons on the remote control or in Display > Aspect Ratio menu. Select an aspect ratio to suit the format of the video signal. There are five aspect ratios available:

In the pictures below, the black portions are inactive areas and the white portions are active areas.

English

1.Anamorphic: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio.

2.4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio.

3.Letter Box: Enlarges an

image with letterbox format to display it in full-screen format with a

16:9 aspect ratio. The upper and lower portions

of the image are cropped. Use this setting for Cinemascope and Vista video wide screen formats.

4.Wide: A 4:3 aspect ratio image is enlarged NON-linearly in horizontal direction to accommodate 16:9 full-screen display. This stretches only the right and left sides of the image; the central part is unchanged.

5.Real: One-to-one mapping is performed on the input signal without any scaling with the image displayed at the center of the screen.

3. Other adjustments

You can adjust Brightness, Contrast, Color, and Tint settings in the Picture menu or with the remote control.

Some picture adjustments are available only when certain input ports are in use. Unavailable adjustments are not shown on the screen.

Using the projector and remote control 21