BenQ PE7700 user manual English, Source buttons Refer to 27 for more information, Light

	1. POWER (Refer to pages 19, 23 and 32 for more information.)
1	Press and hold this button to turn the projector on when it is in the
	standby mode. Or press this button twice to turn the projector off.

2			2.			Source buttons (Refer to 27 for more information.)
						Selects an input source to display on the projector.
3		3.				Aspect buttons (Refer to 26 for more information.)
					9	Selects the image aspect ratio to suit the input signal.
4	4.					Memory (1, 2, 3 and default) buttons (Refer to 26 for more
						information.)
5						Restores settings saved in memory locations 1, 2, and 3, or restores the
						default settings for the current input source.
6					5. Arrows (c/e/d/f) (Refer to 25 for more information.)
				10		Used to select the desired menu or to make adjustments.
7						ENTER (Refer to 25 for more information.)
8						Opens the selected items of the menu.
	6.					MENU (Refer to 25 for more information.)

Turns the on-screen display control menu on or off.

117. Picture quality adjustment buttons (Refer to 25 for more information.)

8.PIP and POP buttons (Refer to page 22 for more information.)

To turn the PIP or POP function on or off, press the PIP or POP button. Adjust the size of the PIP image by pressing the + or - button. If you want to switch between main window and sub-window, or left window and right window, toggle ACTIVE so that you can adjust the image settings in the selected window.

9.Preset (Refer to page 21 for more information.)

Selects one of the preset modes to suit your program type.

10.EXIT (Refer to 25 for more information.)

Exits and saves any changes made using the menu.

11.LIGHT

Turns the remote control’s backlight on.

English

Overview 13