PIP
POP
Turning the power off
Follow the steps below.
1.Press the POWER button on the projector or remote control. A confirmation message appears. To turn the projector off, press POWER again.
2.The Power indicator light flashes green and the fans run for about two minutes to cool the lamp. The projector will not respond to any commands until the cooling process is complete.
3.Then, the Power indicator light is a steady orange once the cooling process has finished and fans stop.
4.If the projector will not be used for an extended period, turn the main power switch off and unplug the power cable from the power outlet.
Sub-window
Main window
Left window
Right window
If You Want To Shut Down The Projector,
Press The Power Key Again
To Perform The Shut Down Process.
English
Using the projector and remote control | 23 |
