Names and functions of each part (continued)
Loading the batteries Loading AA batteries into the remote control.
1Remove the battery cover.
Push the knob while lifting up the battery cover.
Caution Battery usage cautions
•Use only the specified batteries with this projector. Also, do not mix new and old batteries. This could cause in battery cracking or leakage, which could result in fire or personal injury.
•When loading the batteries, make sure the plus and minus poles are correctly oriented as indicated in the projector. Incorrect orientation could cause battery cracking or leakage, which could result in personal injury or pollution of the surrounding environment.
2Loading the batteries.
Make sure the plus and minus poles are correctly oriented.
3Close the battery cover.
Caution Remote control usage cautions
•Do not drop the remote control or apply impact.
•Do not wet the remote control or place it on any wet object. Such actions could result in
malfunction.
•When not to be used for an extended period, remove the batteries from the remote control.
•Replace the batteries when remote control operation becomes difficult.
•Do not place the remote control close to the cooling fan of the projector.
•Do not disassemble the remote control in case of malfunction. please bring it to the service station.
Warning The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people.
The laser beam can cause vision problems.
C A U T I O N
LASER RADIATION-
DO NOT STARE INTO BEAM
WAVE LENGTH: 650nm
MAX . OUTPUT: 1mW
CLASS 2 LASER PRODUCT
RADIAZIONI LASER
NON GUARDARE NEL RAGGIO LUCE
APPARECCHIO LASER DI CLASSE 2
RAYONNEMENT LASER MANUFACTURED
NE PAS REGARDER DANS
LE FAISCEAU APPAREIL
A LASER DE CLASSE 2
NICHT IN DEN STRAHL
BLICKEN LASER KLASSE2
AVOID EXPOSURE-
LASER RADIATION IS
EMITTED FROM THIS
APERTURE
11
