Basic operations (continued)
Turning off the power
1
1
VIDEO 
RGB
LASER
STANDBY/ON POSITION
|
| RESET | |
| MENU |
| |
2 |
| FREEZE | |
MAGNIFY | VOLUME | ||
| |||
3 |
| OFF | |
P in P | MUTE | ||
| |||
| BLANK | AUTO TIMER |
1 | Press the STANDBY/ON button for approximately 1 sec. |
• The Power indicator will blink orange, then the lamp will turn off. Approximately 1 sec. after that, the | |
| lamp will light orange. |
| • After the power is turned off, the lamp will be cooled for approximately 1 min. and the power cannot |
| be turned off even by pressing the STANDBY/ON button. |
| • The standby status will not be entered if the time which the STANDBY/ON button is pressed is too |
| short. |
|
|
2 | Turn off the main power switch of the projector [ : OFF]. |
3 | Attach the lens cap. |
Caution The fan will continue running for approximately 1 min. after the STANDBY/ON button is pressed. Do not turn off the main power switch while the lamp is on because this will shorten the service life of the lamp.
Plug & Play
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is VESA DDC (Display Data Channel) compatible.
(Plug & play is a system configured with peripheral equipment including a computer and display, and an operating system.
Caution Use the RGB cable included with this projector when using plug & play. With other cables, pins (12) - (15) are sometimes not connected (effective only for RGB).
14
