Mitsubishi Electronics DX-TL5000E Rear view, Main switch, AC power socket, Camera connectors

Rear view

3 4 5 6 7 8 9 10

															AUDIO IN
	IN	1	2	3	4	5	6	7	8	VIDEO	VIDEO				1			2
	OUT
																				OPTION SLOT
															3			4
										Y/C
					CAMERA					OUTPUT A OUTPUT B
													CLAMPER		OUT			IN
															AUDIO			CASCADE
	IN	9	10	11	12	13	14	15	16	OUT	IN
	OUT									VIDEO CASCADE								AUDIO OUT
										SERIAL BUS		SERIAL BUS
															LAN-A			LAN-B
			CLAMPER
										RESET					100	10 100			10
															STORAGE			COM
	AC IN~						1 2 3 4 5 6 7 8 9		10 11 12 13 14 15 16	1 2 3 4 5 6 7 8 9	10 11 12 13 14 15 16		ADJCLOCK OUTADJCLOCK REC STOPREC	EMERGENCY RESERVED	1OUTMODE+ 1OUTMODE– 2OUTMODE+ 2OUTMODE– 3OUTMODE+ 3OUTMODE– 4OUTMODE+ 4OUTMODE– +OUTCALL –OUTCALL GND 350mAMAX		OUT12VDC			TERMRS485+ TERMRS485– GND +RS422 –RS422 GND RS232
						GND		ALARM OUT		ALARM IN										P T Z
																		RS485	RS485
MAIN						RS-232C												OUT	IN
OFF	100-240V
	ON
1	2			11		12		13		14					15			16		17

ENGLISH

1.MAIN switch

This is the main power switch. When using this unit, set this switch to ON. Otherwise, the power cannot be turned on/off using the POWER button on the front of the unit.

2.AC power socket

Used to connect the power cord. Earth terminal is used for safety. Use the 100 to 240 V plug with earth for the power of this unit.

•This unit must be earthed at all times. Never connect this unit to a power outlet which does not have an earth terminal.

•Please use the supplied AC power cord.

3. CAMERA connectors

•Do not connect superimposed voltage camera because it causes product failure.

CAMERA IN connectors

Input connector for signal of camera (BNC connector).

CAMERA OUT connectors

Output connector for signal of camera (BNC connector). If the MAIN switch is turned ON, the signal from CAMERA IN connector is looped out to this connector.

OUTPUT B connector

Output connector for video signal to monitor (BNC connector) ( see page 16).

5.VIDEO CASCADE connectors

VIDEO CASCADE IN connector

Input video connector for cascade connection.

VIDEO CASCADE OUT connector

Output video connector for cascade connection.

6.SERIAL BUS port

Input and output port for the device equipped with SERIAL BUS port.

7.LAN-A port

Port for connection of NAS hard disk unit to back up the recorded data.

LAN-B port

Port for communication using web browser.

8.AUDIO BOARD SLOT

Used to attach an optional audio interface board.

9.Keyhole for antitheft lock

Used to connect a commercially available antitheft cable manufactured by Kensington.

10.OPTION SLOT

Used to attach an optional board.

4.VIDEO OUTPUT connectors

OUTPUT A VIDEO connector

Output connector for video signal to monitor (BNC connector).

OUTPUT A S(Y/C) connector

Output connector for video signals that separate brightness signals and colour signals for higher pic- ture quality. Simultaneous output along with OUT- PUT A VIDEO is also possible.

11.GND terminals

It is the common GND terminal.

12.RS-232C connector

Used to connect to a host device equipped with RS- 232C connector (such as a personal computer). This unit can be controlled from other devices via this connector.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning

13