Mitsubishi Electronics DX-TL5000E instruction manual Password Setting

System (continued) Setup Menu

Password Setting

This menu is used to set the password for the lock function. This unit is equipped with 2 lock functions:

SIMPLE LOCK: Does not require to enter a password when unlocking.

PASSWORD LOCK: Requires to enter a password when unlocking.

•When the password for unlocking is not set, lock function executes in SIMPLE LOCK.

•When the password for unlocking is set, lock function executes in PASSWORD LOCK.

4)Unlock the PASSWORD LOCK of level 2.

• The PASSWORD LOCK of level 3 turns on.

•When the PASSWORD LOCK of level 3 turns on, the following operations are locked.

•Menu operations of <Setup Menu> and <System Menu>

•On the front of the unit: POWER, REC/STOP, and TIMER buttons

•On the remote controller: REC/STOP and TIMER ON/OFF buttons

•When the MAIN switch on the rear panel is set to OFF or when a menu is displayed, SIMPLE LOCK and PASSWORD LOCK cannot be turned on/off.

SIMPLE LOCK

When SIMPLE LOCK is turned on, all the operations become inoperable and the unit is locked in the current mode.

•Activating the simple lock

step1. Press the LOCK button while the MAIN switch is set to ON.

•The lock turns on and the LOCK indicator lights up.

•Releasing the simple lock

step1. Press the LOCK button for more than 2 seconds.

•The lock is released and the LOCK indicator turns off.

5)Unlock the PASSWORD LOCK of level 3.

•The PASSWORD LOCK of all the levels are released.

•You can operate all the functions.

•PASSWORD LOCK can be unlocked even when the MAIN switch on the rear panel is set to ON and the POWER button on the front panel set to OFF.

When the password lock is turned on while the power of this unit is turned off, use the LCD display on the front panel to release the lock.

•To use the cascade function, activate the PASSWORD LOCK of level 2 or higher for the slave recorders.

•Registering the PASSWORD

Register a 4-digit number for PASSWORD. When setting the number of each digit, choose the number from 0 to 9.

PASSWORD LOCK

There are 2 types of PASSWORD LOCK, “Operation control” and “Disk management.”

“Operation control” has 3 levels of lock (level 1 to 3).

“Disk management” (level 4) locks the settings of <Data Clear> (System MenuData Clear).

•Using “Operation control” of PASSWORD LOCK (level 1 to 3)

1)Input the PASSWORD of levels 1 to 3.

2)Press the LOCK button to activate the PASSWORD LOCK.

• The PASSWORD LOCK of level 1 turns on.

•When the PASSWORD LOCK of level 1 turns on, all the operations except password lock release and help are locked.

3)Unlock the PASSWORD LOCK of level 1.

• The PASSWORD LOCK of level 2 turns on.

•When the PASSWORD LOCK of level 2 turns on, only the following buttons are operable.

•On the front of the unit: Camera number buttons, buttons related to multiplexer and PTZ functions,

PLAY, STOP, REV. PLAY, PAUSE, SEARCH, TRIPLEX PB, JOG dial, SHUTTLE ring

•On the remote controller: Buttons related to playback and PTZ

•Mouse operations

Setup Menu

4 System

4 Password Setting

steps 1-1 to 1-3

1 Level 1

2 Level 2

3 Level 3

steps 2-1 to 2-2

4 Disk Management Password

(for the levels 1 to 3)

step1-1.Display the password setting screen of the desired level.

step1-2.Input 4 digits of the password by pressing the numbers on the screen.

•To input the password using the buttons on the front panel, use the camera number buttons. 1 to 9 are assigned to the camera number button 1 to 9, 0 is assigned to the button 10.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

58