Mitsubishi Electronics DX-TL5000E Other convenient functions (continued)

78
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
PTZ control
This function is used to control the cameras connected via
RS-232C or RS-422/485 terminal.
step1. Press the camera number button to be controlled
and display the picture in the single screen display.
step2. Press the PTZ button.
•The unit switches to PTZ mode and the button
lights up. “PTZ” appears on the LCD display on
the front panel during PTZ mode.
01-01-2004 00:00:00
PTZ
•The camera number to be controlled appears on
the LCD display on the front panel.
01-01-2004 00:00:00
PTZ CAM1
step3. Control the camera.
Tilt: Press the TILT button to tilt the camera in
the upward direction. Press the TILT button to
tilt the camera in the downward direction.
Pan: Turn the SHUTTLE ring to the right to pan
the camera in the rightward direction. Turn the
SHUTTLE ring to the left to pan the camera in
the leftward direction.
Camera zoom: Press the CAMERA ZOOM
button and then turn the JOG dial to the left (wide)
or right (tele) to adjust the camera zoom.
Focus: Press the FOCUS button and then turn
the JOG dial to the left (far) or right (near) to
adjust the focus of a camera.
Iris: Press the IRIS button and then turn the JOG
dial to the left (close) or right (open) to adjust the
iris of a camera.
Preset: Press the PRESET button and then
press the camera number buttons within 3
seconds to preset the watching points. Up to 16
points can be set.
Auto pan: Press the AUTO PAN button to
activate auto pan within the range between the
preset watching points 1 and 2.
• See “PTZ Setting” on page 70 for the camera
settings or other detailed settings for PTZ function.
Other convenient functions (continued)