81
ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Operations
Registering the picture
This function is used to register a book mark or copy the
picture being displayed using the BOOK MARK button.

Registering a book mark

step1. Press the PAUSE button during playback in the
single screen display.
•The unit switches to still frame playback of the
single screen display.
step2. Press the BOOK MARK button on the front panel.
step3. Select “Enter” of “Register Bookmark” in the selection
screen.
step4. Press the desired book mark number (1 to 8).
•For example, when pressing number 1, book
mark 1 is registered.
•Book marks can be memorized in main device
(normal and alarm areas) only. When the main
device is partitioned, 8 book marks can be
memorized for normal and alarm areas
respectively.
•BOOK MARK button does not function during split
screen display.
•The same position can be registered repeatedly with
the different book mark number.
•The registered book mark can be overwritten, but
cannot be deleted.

Picture copy

step1. Follow the steps 1 and 2 on “Registering a book
mark” above.
step2. Select “Copy” of “Copy data to DVD/CD drive.” or
“Copy data to Memory Disk.”
•The picture is copied.
Functions of the unit in case of power failure

Power failure compensation circuit

The unit is equipped with an internalized power failure com-
pensation circuit. When the unit has been charged for 48
hours (full), the date, time, timer record settings, and menu
settings are kept up to 1 month without power. The accu-
racy of the time will decline if the power plug is not con-
nected to the wall outlet for and extensive period. In this
case, it is recommended to check the present time setting.

Power failure reset recording

If there is a power failure during recording, the recording
will resume after the power is restored. If there is a power
failure during timer recording, the recording will resume
after the power is restored when within the set time period
of the timer. For alarm recording, recording will stop even
within the set recording time.
•When the power failure occurs during recording, the
picture and audio of up to 6 MB just before the power
failure are not recorded. When the pre-alarm recording
time is set to other than 0 second, picture and audio
of up to 32 MB are not recorded.
•When the power failure occurs during alarm or
emergency recording, alarm or emergency recording
is cancelled after the power is restored.
•“REC ON” is registered in the system log list when the
recording is started, but it is not registered when the
recording is resumed after a power failure.
•The playback picture at the start position where
recording is resumed after a power failure may be
disturbed and the search function may not operate
properly.

Log function when power failure occurs while the

unit is in operation or the MAIN switch on the rear

of the unit is turned OFF

In the event of power failure or the MAIN switch on the rear
of the unit is turned OFF during the power is supplied, up
to 1000 items (including the time of failure and warning log
displays as well as other warning items) are saved in the
<System Log List>. ( See page 71.)
RESET button
When pressing the RESET button on the rear panel with a
ballpoint pen, etc., the microcomputer of this unit is reset
and the power turns off.
•The menu settings, the present time and picture data
are kept even when resetting the unit.