Mitsubishi Electronics DX-TL5000E Multiplexer Setting

62
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
System (continued) Setup Menu
Multiplexer Setting
This menu is used to set the multiplexer setting of <Output
A Display Settings> and <Output B Display Settings>
(Setup Menu System Multiplexer Setting Output A
Settings/Output B Settings) respectively.
Output A Display Settings
This item is used to set the camera number to be displayed
in the split screen display on the monitor connected to
OUTPUT A. And also used to set the sequential display
settings and the switching time. Sequential display is the
function to switch the selected displays automatically.
The selectable screen types are shown in the table on
page 61.
Setup Menu
Output A Settings
1
Split 4a screen
Split 4b screen
Split 4c screen
Split 4d screen
1
2
Split 9a screen
Split 9b screen
1
2
3
4
Split 4 screen
1
Split 9 screen
2
Split 10a screen
Split 10b screen
1
2
Split 10 screen
3
Split 13a screen
Split 13b screen
1
2
Split 13 screen
4
Split 16 screen
5
Sequence Single
6
Sequence Multi
7
5
System
4
Multiplexer Setting
step 1
step 2
step 4
step 3
(Split screen)
step1. Select the camera number to be displayed for each
split screen.
•The same camera number cannot be set repeatedly
in one split screen display.
(Sequential screen)
step2. For single sequential screen, set the displaying order
of the camera number in “Sequence Single.”
step3. For split sequential screen, select the displaying
order of the screen type in “Sequence Multi.”
step4. Select the desired switching time.