19
ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Connections
Attaching or removing the HDD
Up to 3 HDDs can be mounted on this unit. The attaching,
removing and replacing method of the HDDs are as follows.
Turn off the MAIN switch on the rear panel before
attaching or removing the HDD.
When attaching multiple HDDs, attach in the order of
HDD A, B, and C.

When removing a HDD

step1. Push the left end of each screw covers on both sides
of the cover to open.
Do not leave the screw cover open for general use.
step2. Remove the screws.
step3. Remove the front covers.
Remove the cover on the right side first.
Then, push the left side cover to the right to
remove.
step4. Remove the metal part.
Remove 4 screws on the metal part.
step5. Pull out the HDD tray halfway.
HDD A
HDD B HDD C
step6. Disconnect the cords.
step7. Remove the HDD tray.
Pull out the HDD tray completely.
step8. Remove the HDD.
Remove 4 screws which are used to fix the HDD
and its frame.