Mitsubishi Electronics DX-TL5000E Camera number button operations, Split buttons operations

System (continued) Setup Menu

Multiplexer function related button operations/operation table

The multiplexer function of this unit allows the picture sup- plied from the camera to be displayed using split screens. It is also possible to set the position of the camera number

to be displayed. ( See page 88 for basic operations of the multiplexer.)

Camera number button operations

When pressing a camera number button, the picture supplied from the camera connected to that camera number terminal is displayed in a single screen. Even during split/ sequential screen display, picture of any camera number can be displayed in a single screen by pressing the respective camera number button.

SPLIT buttons operations

When pressing the SPLIT buttons, the split screen is dis-

played in the following order.
SPLIT4 (	) button	: SPLIT 4a SPLIT 4b SPLIT
		4c SPLIT 4d	SPLIT 4a	• • •
SPLIT9 (	) button	: SPLIT 9a SPLIT 9b SPLIT 9a
		• • •
SPLIT10 (	) button	: SPLIT 10a	SPLIT 10b	SPLIT
		10a • • •
SPLIT13 (	) button	: SPLIT 13a	SPLIT 13b	SPLIT
		13a • • •
SPLIT16 (	) button	: SPLIT 16 screen

SEQUENCE button operations

When pressing the SEQUENCE button, the sequential display of the split or single display being displayed is started. Make the detailed settings of this display in the <Multiplexer Setting> (Setup MenuSystemMultiplexer Setting).

Available modes

“SPLIT 13 sequential,” “SPLIT 10 sequential,” “SPLIT 9 sequential,” “SPLIT 4 sequential,” “Single screen sequential”

•Sequential display does not appear during playback.

•The split screen setting can be set using “Split 4 screen,” “Split 9 screen,” “Split 10 screen,” “Split 13 screen” or “Split 16 screen” in the <Output A Display Settings> and <Output B Display Settings> (Setup MenuSystemMultiplexer SettingOutput A Display Settings/Output B Display Settings) respectively.

To cancel the sequential display

Displaying other type of split screen or pressing a camera number button (1 to 16) for displaying single screen can- cels the sequential display.

•When a menu screen is displayed, the single screen display does not appear even when pressing a camera number button (1 to 16). In this case, clear the menu screen first and then press a camera number button (1 to 16).

DIGITAL ZOOM button operations

By pressing the DIGITAL ZOOM button during single screen display, the displayed picture can be viewed at 100%, 200% or 400% magnification.

•The magnification display function can be used only during the single screen display. The centre point moves vertically and horizontally by pressing the MOVE buttons.

step1. Press the DIGITAL ZOOM button during single screen display.

•“X1” appears on the top left of the single screen display and the magnification centre point (X) appears at the centre of the screen.

X1

X

step2. To move the centre point vertically or horizontally, press the , , and buttons.

•The position of the magnification centre point is stored even when the display screen is switched or the power is turned off. This is useful when the point to magnify is determined in advance.

step3. Press the DIGITAL ZOOM button.

•Each time the button is pressed, the magnification percentage switches in the order of X2(200%), X4(400%), normal, and X1(100%).

X2 X4

•The magnification function can also be used during playback.

•When playing back the picture recorded by multiple cameras in the single screen display, a black screen may appear when pausing the playback and display the magnified screen. In this case, display the magnified screen by turning the JOG dial to advance the picture frame by frame.

•The magnification display function of this unit uses digital magnification and screen details may appear pixelized when magnifying.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

60