Mitsubishi Electronics DX-TL5000E When you have selected cancel, If you have selected cancel

Communications by Web Browser (continued)

•Certain items cannot be selected depending on what the user authorization is.

•“Configuration” authorization can be used by only one user. From the time that a user logs in until that user logs out and gives up authorization, any other user that logs in is regarded as a user who does not have “Configuration” authority.

•“Playback” authorization can only be used by one user. From the time that a user logs in until that user logs out and gives up authorization, any other user that logs in is regarded as a user who does not have “Playback” authority.

2-2. (To change settings • • • )

Select “change” and left-click. The “[Change Confirmation]” screen will appear.

2-3. If you want to make the change, left-click “change.” If you want to cancel a change, left-click “cancel.”

2-4. (When you have selected “change” • • • )

The “[Completed]” screen will appear, so then left-click “User Registration.”

•The “[User Registration]” screen reappears.

2-5. (When you have selected “cancel” • • • )

•The “[User Registration]” screen reappears.

4-4. (If you have selected “register” • • • )

It will be added to “Change authorities of users.” 4-5. (If you have selected “clear” • • • )

Clears the specified contents.

5-1. (To change the access method settings • • • )

Select the item to be changed in the “Access Mode Setup.”

•Use Keep-Alive:

Maintains the connection of TCP in order to speed up the update of the live pictures, etc.

Uses keep-alive when the check mark is entered.

•Use SSL for Web Access:

Sets the level of the encryption function (SSL). “No SSL”: Does not use the encryption function. “Menus only”: Uses the encryption function for the menus only.

“Menus + Pictures”: Uses the encryption function for the menus and pictures.

•SSL Port Settings:

Sets the port number used for SSL.

•Band-Width Limit:

Controls the band width of the communication. The available setting items are “No Limit,” “30Mbps,” “20Mbps,” “10Mbps,” “7.5Mbps,” “5Mbps,” “3Mbps,” “2Mbps,” “1Mbps,” “750kbps,” “500kbps,” “300kbps,” “200kbps,” “100kbps.”

3-1. (To delete a registered user • • • )

Left-click on “remove” in the user ID that you want to delete in “Change authorities of users.”

•The “[Remove Confirmation]” screen appears.

3-2. If you want to delete it, left-click “remove.” If you don’t want to delete it, left-click “cancel.”

3-3. (If you have selected “remove” • • • )

The “[Completed]” screen will appear, so left-click “User Registration.”

•The “[User Registration]” screen reappears.

3-4. (If you have selected “cancel” • • • )

•The “[User Registration]” screen reappears.

4-1. (To register a new user • • • )

Enter the new user ID and new password in “Add New User.”

4-2. Refer to step 2-1, select the “Authority” desired and check it.

•A user ID with the same name cannot be registered. The maximum number of characters that can be used in registering a password is 16. Both alphabet letters and numbers can be used with a distinction made between upper and lower case. You cannot use spaces.

4-3. If you want to make a new registration, left-click “register.” If you want to cancel a new registration, left- click “clear.”

•When using SSL, the following message appears. Select “Yes” and then continue the operation.

•When using keep-alive, the update speed of the picture becomes faster, however, the number of the users that can be connected at the same time is restricted to 5.

5-2. Set the desired setting in “New Settings” and then select “change” and left-click.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

98