ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning
11
Camera control buttonsThe following buttons control the camera when
pressed during PTZ mode in the single screen
display. Use the following buttons after pressing PTZ
button.
CAMERA ZOOM button
Adjusts the camera zoom.
Press this button and then
turn JOG to the left
(wide) or right (tele) to adjust the
camera zoom.
FOCUS button
Adjusts the focus of a camera. Press this button and
then turn JOG to the left
(far) or right (near)
to adjust
the focus.
IRIS button
Adjusts the iris of a camera. Press this button and
then turn JOG to the left
(close) or right (open)
to
adjust the iris.
PRESET button
Presets up to 16 watching points. Press this button
and then press the camera number button within 3
seconds to preset the points.
AUTO PAN button
Activates auto pan within the range between the
preset watching points 1 and 2.
16. OUTPUT A/B buttonSwitches the multiplexer output between A and B.
The light turns off when OUTPUT A is selected and
lights up when OUTPUT B is selected. The playback
and search functions are also switched between
OUTPUT A and B.
TILT buttonWhen pressing the button during PTZ mode, the
angle of the camera adjusts to the downward
direction.
17. Disc loading slotLoad the DVD disc or CD here to copy/back up the
recorded data.
The supported discs are:
DVD-RW, DVD-R, CD-R, and CD-RW
OPEN/CLOSE buttonOpens or closes the disc loading slot.
BUSY indicatorFlashes or illuminates during recording or playback.
18. LCD displayDisplays the present time and the status of the unit.
19. SHUTTLE ringAdjusts the playback speed, and rewinds or forwards
the recorded pictures.
Pans the camera.
20. JOG dialForwards or rewinds the picture during playback
(frame-by-frame).
Uses for controlling the camera connected.
21. Camera number buttons (1 to 16)Displays the picture supplied from the camera
connected. The number of the button corresponds
to that of the CAMERA IN connector on the rear
panel. The button of the displayed camera number
lights up.
Uses for the preset function of the camera control.
Uses for the menu settings.
M-DET DOT ON/OFF/M-DET AREA SET UP(CAMERA NUMBER 9 and 13)Uses for setting the detection area of the motion
detection function.
Loading/Ejecting a DVD disc or CD•Before using the disc, read the cautionary notes
described in the manual included with the disc.
step1. Press the OPEN/CLOSE button.
•The disc loading tray opens.
(When loading the disc:)
step2-1.Place the disc into the tray.
•Make sure the disc is sitting properly in the correct
recess, with the label side up.
(When ejecting the disc:)
step2-2.Eject the disc from the tray.
step3. Press the OPEN/CLOSE button again.
•The disc loading tray closes.
•Do not eject the disc while copying/restoring, saving/
loading menus, or immediately after inserting the
disc. The disc or the contained data may be
damaged.
•Please use the disc which we recommend. When a
disc other than the recommended one is used, the
data may not be read or written correctly. Please
consult your dealer of purchase for the usable discs.
•When using DVD-RW or CD-RW disc, initialize the
disc before using by <Data Clear> menu.