to 100 feet, do not submerge in water for extended periods of time.

1.ADJUSTING THE STRAP

The rubber strap is adjustable to fit most all wrist sizes. It is also replaceable with a properly sized band available at a local watch or department store. The strap is held in place by a pin on each side.

VIII. REPLACING THE BATTERY

The battery can either be replaced by a qualified jeweler or watch repair shop, or by the user.

Any damage resulting from this procedure is not covered under warranty.

1.

Remove the four screws located

 

on the back and remove the cover.

 

Be sure the watch movement and

 

gasket do not come out of

Battery clip

 

the case.

 

Battery

2.

Remove the old battery

compartment

 

by gently prying up the

 

battery clip.

 

3.Insert a new battery of the type “CR1620” 3 Volt Lithium Cell battery

4.Please dispose of the old battery properly.

TROUBLESHOOTING

Problem:

No WWVB signal (indicated by the absence of the WWVB tower icon).

Solution:

1)

Check the selected Time Zone. If it is set between GMT+1 and GMT

 

+12, the WWVB signal will not be received. Change the Time Zone.

 

2)

Move watch 10 feet (3 meters) away from any interfering sources, i.e.

 

electrical appliances (refrigerators, TV’s, computers), metal surfaces or

 

objects.

 

3)

To help with overnight reception, place watch in a window with the

 

band inline with the general direction of Ft. Collins, Colorado.

 

4)

There are a few places the signal is very weak (Los Angeles area, Some

 

parts of Florida and New York City). Since the watch has a much smaller

 

receiver than our other clocks, it is possible no reception can be made.

 

Please inform La Crosse Technology in this case.

Problem:

The watch displays “-:--” and no date

Solution:

1)

The watch entered the power off mode and was reactivated. No signal

 

has been located, and no time is set. Once the watch receives the time

 

signal successfully (usually at night), it will display the correct time and

 

date (Eastern Time zone is the default).

Problem:

The hour or minute is incorrect, even though the tower icon is on

 

(indicating a successful reception of the WWVB time signal the previous

 

night) and it is set to the proper time zone.

Solution:

1)

Electrical interference caused the time signal to be improperly received.

 

Be sure the watch is at least six feet from any source of electrical activity

 

(television, computer). Overnight it should correct itself.

 

2)

You may need to perform a reset; follow the directions outlined in

 

section IV.

Note: For all questions not answered contact La Crosse Technology (contact information is below).

WARRANTY INFORMATION

La Crosse Technology provides a 1-year warranty on this watch. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the watch in for repairs, contact La Crosse Technology. The watch will be repaired or replaced with the same or similar model. This warranty does not cover any defects resulting from improper use, unauthorized repairs, faulty batteries, or the watch’s inability to receive a signal due to any source of interference.

LA CROSSE TECHNOLOGY WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS WATCH. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDRENS’ REACH.

This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you.

For warranty work, technical support, or information contact:

La Crosse Technology

2809 Losey Blvd. S.

La Crosse, WI 54601

Phone: 608.782.1610

Fax: 608.796.1020

e-mail:

support@lacrossetechnology.com

(warranty work)

sales@lacrossetechnology.com (information on other products) web: www.lacrossetechnology.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Page 1 Page 2
Page 2
Image 2
La Crosse Technology WT-941 setup guide Adjusting the Strap, VIII. Replacing the Battery, Troubleshooting
Page 1 Page 2

WT-941 specifications

The La Crosse Technology WT-941 is a sophisticated atomic clock and weather station designed for those who value precision and convenience in their timekeeping and weather monitoring needs. This device is more than just a clock; it offers a host of features that cater to both indoor and outdoor users, making it an ideal choice for households and offices alike.

One of the standout features of the WT-941 is its atomic timekeeping capability. Utilizing radio signals from the National Institute of Standards and Technology (NIST) in Colorado, the WT-941 automatically synchronizes its time to ensure unmatched accuracy. It adjusts for time changes such as Daylight Saving Time, removing the hassle of manual adjustments. This function means users can rely on real-time updates without needing to lift a finger.

Beyond its timekeeping function, the WT-941 doubles as a weather station. It comes equipped with an outdoor sensor that measures temperature and humidity, providing users with real-time weather conditions at a glance. The data is displayed clearly on the large, easy-to-read LCD screen, which offers a comprehensive overview of both the indoor and outdoor environment. Users can view minimum and maximum temperature and humidity records over a specified period, helping in both planning and monitoring personal comfort levels.

The WT-941 boasts a sleek and modern design that fits seamlessly into various settings, whether it's on a bedside table, a kitchen counter, or a home office desk. The display features adjustable brightness, allowing users to customize lighting according to their preference and surroundings.

Additionally, the device supports multiple language options, catering to a diverse user base. Its user-friendly interface ensures that even the technologically challenged can navigate through its settings effortlessly.

Another remarkable feature is its ability to monitor multiple outdoor sensors, enhancing its capability to track weather conditions from different areas around your home or property.

In summary, the La Crosse Technology WT-941 offers a perfect blend of functionality and style, combining accurate atomic timekeeping with comprehensive weather monitoring. Its durability, coupled with its appealing aesthetic, makes it a worthwhile addition to any space. Whether you're a weather enthusiast or simply someone who appreciates having an accurate timepiece, the WT-941 is an excellent choice.
Top Page Image Contents