MC55 AT Command Set
10.17 ATH s
m
obil
e
MC55_ATC_V01.05 Page 275 of 469 2/10/04
Confidential / Released
10.17 ATH Manual rejection of a network request for PDP context acti-vation
Syntax
Command Description
The V.25ter ATH command may be used to deactivate all PDP contexts which are active or online on the sam e
interface.
The ATH command may also be used to reject a network request for PDP context activatio n announced by the
unsolicited result codes "RING" or "+CRING:GPRS".
Notes
In contrast to GSM 07.07 it is possible to cancel a connection with ATH after a break. This is done for com-
patibility reasons due to the "dial-up network" drivers of Microsoft Windows.
ATH is used as a standard V.25ter AT Command, too.
If ATH is used to reject a network request for PDP context activation, then other PDP contexts on the same
interface which are active or online will not be deactivated.
Exec Command
ATH
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % § % § §
Reference(s)
GSM 07.07