Siemens MC55 manual ATSPBG=1,33,1, AT+CPBR=27, +CPBR 27,+999999,145,Arthur

MC55 AT Command Set

15.7 AT^SPBG

s

mobile

numbers assigned to the entries' positions in the alphabetical list.

EXAMPLE 2

Using AT^SPBG with <RealLocReq>

-First, run the test command to find out the range of phonebook entries stored in the active phonebook:

AT^SPBG=?

TA returns the number of entries in the format:

^SPBG: (1-33),20,17

where 33 is the total number of entries in the active phonebook storage.

-Now, run the write command to display the phonebook entries by alphabetical order. It is recommended to enter the full range to obtain best results.

Use parameter <RealLocReq>=1 in order to obtain the entries' location numbers.

AT^SPBG=1,33,1

TA returns phonebook entries by alphabetical order:

^SPBG:1,"+999999",145,"Arthur",27 ^SPBG:2,"+777777",145,"Bill",6

^SPBG:3,"+888888",145,"Charlie",15 .........

-The numbers at the end of each line are now the memory locations in the phonebook and can be used for dialing or editing phonebook entries:

AT+CPBR=27

Read out phonebook location 27.

+CPBR: 27,"+999999",145,"Arthur"

-This entry can now be edited with AT+CPBW.

MC55_ATC_V01.05	Page 386 of 469	2/10/04
Confidential / Released