MC55 AT Command Set

12.10 AT+CNMA

Notes

s

mobile

The execute / write command shall only be used when AT+CSMS parameter <service> equals 1 (= phase 2+).

Both the execute and the write command can be used no matter whether text mode or PDU mode is activated.

If multiplex mode is activated (AT+CMUX=0) the AT+CNMI parameter will be set to zero on all channels, if one channel fails to acknowledge an incoming message within the required time.

MC55_ATC_V01.05

Page 329 of 469

2/10/04

Confidential / Released

 

 

Page 329
Image 329
Siemens MC55 manual Mobile