MC55 AT Command Set

9.13 AT+CUSD

s

mobile

is sent to the network. The response USSD string from the network is returned in a subsequent unsolicited result code "+CUSD"

The interaction of this command with other commands based on other GSM supplementary services is described in the GSM standard.

Parameter Description

<n>(num)

0(&F)

Disable the result code presentation in the TA

1

Enable the result code presentation in the TA

2

Cancel session (not applicable to read command response)

<str>(str)

String type USSD-string (when <str> parameter is not given, network is not interrogated).

If <dcs> indicates that GSM 03.38 default alphabet is used TA converts GSM alphabet into current TE character set according to rules of GSM 07.05 Annex A.

<dcs>(num)

GSM 03.38 Cell Broadcast Data Coding Scheme in integer format (default 15)

<m>(num)

0

No further user action required (network initiated USSD-Notify, or no further

 

information needed after mobile initiated operation)

1

Further user action required (network initiated USSD-Request, or further infor-

 

mation needed after mobile initiated operation).

 

If <m>=1, then the URC ends with ">" to prompt the user for input. The user

 

action is finished with <CTRL-Z>or aborted with <ESC>.

2

USSD terminated by network.

Notes

For the write command, only <dcs>= 15 is supported.

When a USSD string is sent via ATD, a "AT+CUSD=1" is executed implicitly.

MC55_ATC_V01.05

Page 242 of 469

2/10/04

Confidential / Released

 

 

Page 242
Image 242
Siemens MC55 manual Strstr, Dcsnum