Siemens MC55 manual Atsnfd Set audio parameters to manufacturer default values, Atsnfd=?

MC55 AT Command Set

16.10 AT^SNFD

s

mobile

16.10AT^SNFD Set audio parameters to manufacturer default values

Syntax

Test Command

AT^SNFD=?

Response(s)

OK

Exec Command

AT^SNFD

Response(s)

OK

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

SIEMENS

Command Description

TA sets the active audio parameters to manufacturer defined default values.

Notes

•The restored values are:

AT^SNFI: <inBbcGain>, <inCalibrate> (or the equivalent AT^SNFA parameters)

AT^SNFO: <outBbcGain>, <outCalibrate>[0 to 4], <sideTone>

AT^SAIC: <io>, <mic>, <ep>

AT^SNFS: <audMode>

•Remember that the factory set audio mode 1 is fixed to <outStep>=4. Consequently, AT^SNFD restores <audMode> together with <outStep>=4, but does not affect the values of <outStep> currently selected in audio modes 2 - 6. This means, if <audMode>=1, the read commands AT^SNFO, AT^SNFV and AT+CLVL will always return <outStep>=4. In all other modes the <outStep> value is retained until explicitly changed.

MC55_ATC_V01.05	Page 405 of 469	2/10/04
Confidential / Released