Siemens MC55 manual Cid, Precedencenum Precedence class, Delaynum Delay class

MC55 AT Command Set

10.8 AT+CGQMIN

s

mobile

<cid>.

A special form of the set command, AT+CGQMIN= <cid> causes the minimum acceptable profile for context number <cid> to become undefined. In this case no check is made against the negotiated profile.

AT&F and ATZ will undefine the minimum QoS profiles of every context which is not active or not online.

Parameter Description

<cid>(num)

Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is used in other PDP context-related commands.

1...2

<precedence>(num) Precedence class

[0]	network subscribed value
1	High Priority
	Service commitments shall be maintained ahead of precedence classes 2 and
	3
2	Normal priority
	Service commitments shall be maintained ahead of precedence class 3
3	Low priority
	Service commitments shall be maintained

<delay>(num) Delay class

The delay parameter defines the end-to-end transfer delay incurred in the transmission of SDUs through the GPRS network(s).

[0]	network subscribed value
1..4	SDU size: 128 octets:
	Delay Class		Mean Transfer Delay	95 percentile
	1	(Predictive)	<0.5	<1.5
	2	(Predictive)	<5	<25
	3	(Predictive)	<50	<250
	4	(Best Effort)	Unspecified
	SDU size: 1024 octets:
	Delay Class		Mean Transfer Delay	95 percentile
	1	(Predictive)	<0.5	<1.5
	2	(Predictive)	<5	<25
	3	(Predictive)	<50	<250
	4	(Best Effort)	Unspecified

MC55_ATC_V01.05	Page 257 of 469	2/10/04
Confidential / Released