Siemens MC55 - page 64

MC55 AT Command Set

3.1 AT+CMER s

obil

MC55_ATC_V01.05 Page 64 of 469 2/10/04

Confidential / Released

Unsolicited Result Code

+CIEV: <indDescr>, <indValue>

A value of an indicator has changed.

Command Description

The read command returns the URC presentation mode <mode> and among others, the indicator event reporting

status <ind>.

The write command enables and disables the presentation of "+CIEV: <indDescr>, <indValue>" URCs.

<indDescr> refers to the name of a "+CIEV" indicator and <indValue> is the new value of this indicator. A ll

registered indicator events will be issued to the TE.

Parameter Description

0(&F) Discard "+CIEV" and "^SLCC" URCs.

1 Discard "+CIEV" and "^SLCC" URCs when TA-TE link is reserved, e.g. in

online data mode. Otherwise they are forwarded directly to the TE.

2 Buffer "+CIEV" and "^SLCC" URCs in the TA while TA-TE link is reserved, e.g.

in online data mode, and flush them to the TE afterwards. Otherwise they are

forwarded directly to the TE.

3Forward "

+CIEV" and "^SLCC" URCs directly to the TE. If MC55 is in online

data mode, URCs are signaled via sending BREAK (100ms) and stored in a

buffer. Once it is back in command mode e.g. after +++ was entered, all URCs

stored in the buffer will be output.

0(&F) Keypad event reporting is not supported by MC55.

0(&F) Display event reporting is not supported by MC55.

0(&F) Disable indicator event reporting.

2 Enable indicator event reporting.

0(&F) TA buffer of URCs defined within this command is cleared when <mode> 1..3

is entered.

Name of indicator; for a list of all supported indicators please refer to AT+CIND and AT^SIND.

Value of indicator; for a list of all values for the supported indicators please refer to AT+CIND and AT^SIND.

<mode>(num)

<keyp>(num)

<disp>(num)

<ind>(num)

<bfr>(num)

<indDescr>(str)

<indValue>(num)