MC55 AT Command Set
1.9 Errors and Messages s
m
obil
e
MC55_ATC_V01.05 Page 29 of 469 2/10/04
Confidential / Released
1.9 Errors and MessagesThe final result codes "+CME ERROR: <err>" and "+CMS ERROR: <err >" indicate errors related to mobile equip-
ment or network. The effect is similar to an ERROR result code.
A final result error code terminates the execution of the command and prevents the execution of all remaining
commands that may follow on the same command line. If so, neither ERROR nor OK result code are returned
for these commands. A 30 seconds timeout causes ERROR to be returned when the input of a command is not
complete.
The format of <err> can be either numeric or verbose. This is set with the com mand AT+CMEE.
See also:
•2.11.1
•2.5.1
•AT+CEER