Siemens MC55 manual Using the Gprs dial command ATD, Connect, By AT+CGDCONT

MC55 AT Command Set

10.20 Using the GPRS dial command ATD

s

mobile

10.20Using the GPRS dial command ATD

Example

In addition to the GPRS AT commands you can use the "D" command to dial into to the GPRS network.

There are two GPRS Service Codes for the ATD command: Values 98 and 99.

Examples:

ATD*99#
CONNECT	Establish a connection by service code 99.
ATD*99*123.124.125.126*PPP*1#
CONNECT	Establish a connection by service code 99, IP
	address 123 and L2P = PPP and using CID 1.
	The CID has to be defined by AT+CGDCONT.
ATD*99**PPP#
CONNECT	Establish a connection by service code 99 and L2P
	= PPP.
ATD*99***1#
CONNECT	Establish a connection by service code 99 and using
	CID 1.
ATD*99**PPP*1#
CONNECT	Establish a connection by service code 99 and L2P
	= PPP and using CID 1. The CID has to be defined
	by AT+CGDCONT.
ATD*98#
CONNECT	Establish a connection by service code 98.
ATD*98*1#
CONNECT	Establish an IP connection by service code 98 using
	CID 1. The CID has to be defined by AT+CGDCONT.

MC55_ATC_V01.05	Page 280 of 469	2/10/04
Confidential / Released