MC55 AT Command Set

10.8 AT+CGQMIN

s

mobile

10.8AT+CGQMIN Quality of Service Profile (Minimum acceptable)

Syntax

Test Command

AT+CGQMIN=?

Response(s)

+CGQMIN: <PDP_type>, (list of supported <precedence>s), (list of supported <delay>s), (list of supported <reliability>s), (list of supported <peak>s), (list of supported <mean>s)

OK ERROR +CME ERROR

Read Command

AT+CGQMIN?

Response(s)

+CGQMIN: <cid>, <precedence>, <delay>, <reliability>, <peak>, <mean>

...

OK ERROR +CME ERROR

Write Command

AT+CGQMIN=[<cid>[, <precedence>[, <delay>[, <reliability>[, <peak>[, <mean>]]]]]]

Response(s)

OK ERROR +CME ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

GSM 07.07

Command Description

The test command returns values supported as a compound value. If the MT supports several PDP types, the parameter value ranges for each PDP type are returned on a separate line.

The read command returns the current settings for each defined context. If no minimum profile was explicitly specified for a context, simply OK will be returned, but default values will be used for that context.

This command allows the TE to specify a minimum acceptable profile which is checked by the MT against the negotiated profile returned in the Activate PDP Context Accept message.

The set command specifies a profile for the context identified by the (local) context identification parameter,

MC55_ATC_V01.05

Page 256 of 469

2/10/04

Confidential / Released

 

 

Page 256
Image 256
Siemens MC55 manual At+Cgqmin=?, At+Cgqmin?, +CGQMIN cid, precedence, delay, reliability, peak, mean