Siemens MC55 manual Superscript notation for parameters and values

MC55 AT Command Set

1.3 Document conventions

s

mobile

1.3.2Superscript notation for parameters and values

Table 1.1:	Symbols used to indicate the correlations with other commands
Parameter option		Meaning
<param>(&W)		Parameter value will be stored with AT&W
<param>(&V)		Parameter value will be displayed with AT&V
<param>(ˆSNFW)		Parameter value will be stored with AT^SNFW
<param>(+CSCS)		Parameter value has to be (is) coded according to current setting of <chset> (see
		AT+CSCS for details)
Table 1.2:	Symbols used to mark different types of default values of parameters
Value option		Meaning
[x]		Default value: if the parameter is omitted, the value 'x' will be assumed
x(&F)		Factory default value, will be restored to 'x' with AT&F
x(P)		Powerup default value of a parameter which is not stored at power down
x(D)		Delivery default value of a parameter which cannot be restored automatically

MC55_ATC_V01.05	Page 16 of 469	2/10/04
Confidential / Released